Engineering Mechanics

International Conference

Proceedings Vol. 23 (2017)

ENGINEERING MECHANICS 2017

23rd INTERNATIONAL CONFERENCE
May 15 – 18, 2017, Svratka, Czech Republic
Editors: Vladimír Fuis

Copyright © 2017 Brno University of Technology, Faculty of Mechanical Engineering, Institute of Solid Mechanics, Mechatronics and Biomechanics, Brno

ISBN 978-80-214-5497-2 (printed)
ISSN 1805-8248 (printed)
ISSN 1805-8256 (electronic)

scientific commitee

keynote lectures

AEROBATIC SPECIAL IN-FLIGHT TESTS AT INSTITUTE OF AEROSPACE ENGINEERING
Jebáček I., Matějů J., pages 42 - 45
SPECIFICS OF AEROSTRUCTURES EXPERIMENTAL TESTING
Juračka J., pages 46 - 49
DEVELOPMENT OF NEW TYPE VENTILATION DUCTS SYSTEM
Peszynski K., Olszewski L., Smyk E., Kasprowicz T., pages 50 - 53
MODERN TOOLS FOR VEHICLE DEVELOPMENT
Porteš P., Kučera P., Píštěk V., Fojtášek J., Zháňal L., pages 54 - 57
SHOCK WAVES IN AN IDEAL GAS AND ENTROPY ANALYSIS
Šafařík P., pages 58 - 65

papers

ANALYSIS OF THE DIMENSIONAL ACCURACY OF CASTING MODELS MANUFACTURED BY FUSED DEPOSITION MODELING TECHNOLOGY
Adamczak S., Zmarzły P., Kozior T., Gogolewski D., pages 66 - 69
ASSESSMENT OF ROUNDNESS AND WAVINESS DEVIATIONS OF ELEMENTS PRODUCED BY SELECTIVE LASER SINTERING TECHNOLOGY
Adamczak S., Zmarzły P., Kozior T., Gogolewski D., pages 70 - 73
MATHEMATICAL MODELING OF MICRO INDENTATION OF A TRANSVERSELY ISOTROPIC HALF-SPACE WITH FUNCTIONALLY GRADED COATING BY A CONICAL INDENTER
Aizikovich S., Vasiliev A., Volkov S., Mitrin B., pages 74 - 77
ANALYSIS OF VEHICLE COLLISIONS WITH THE SDC METHOD
Aleksandrowicz P., pages 78 - 81
VERIFYING THE APPLICATION OF THE MODELS OF CRASH AND COLLISION DETECTION OF INCOMPATIBLE VEHICLES
Aleksandrowicz P., pages 82 - 85
VIDEOGRAMMETRY IN FLUIDIZED BEDS ANALYSIS
Anweiler S., pages 86 - 89
PARAMETER ESTIMATION FOR ENGINEERS: A NEW TOOL FOR EFFECTIVE SEARCH FOR SIMULINK MODEL PARAMETERS
Appel M., Grepl R., pages 90 - 93
INFLUENCE OF GROUND STRESS DISTRIBUTION ON PUNCHING RESISTANCE
Augustín T., Fillo Ľ., pages 94 - 97
OPTIMAL PASSIVE CONTROL OF SHEAR BUILDINGS
Aydin E., Öztürk B., Dutkiewicz M., pages 98 - 101
PLASTIC RESISTANCE OF ALUMINUM I-PROFILE UNDER BENDING AND TORSION ACCORDING TO CONTINUOUS STRENGTH METHOD
Baláž I., Koleková Y., pages 102 - 105
AERODYNAMIC HYSTERESIS OF OSCILLATING AIRFOIL
Bang N. V., Rozehnal D., pages 106 - 109
STEADY FLOWS OF SECOND-GRADE FLUIDS SUBJECT TO STICK-SLIP BOUNDARY CONDITIONS
Baranovskii E. S., Artemov M. A., pages 110 - 113
INTEGRATION OF VISION SYSTEM AND ROBOTIC ARM UNDER ROS
Baranowski L., Kaczmarek W., Panasiuk J., Prusaczyk P., Besseghieur K., pages 114 - 117
USE OF A RASPBERRY PI TO BUILT A PROTOTYPE WIRELESS CONTROL SYSTEM OF A MOBILE ROBOT
Baranowski L., Panasiuk J., Siwek M., pages 118 - 121
A CONCEPT FOR TESTING AND MONITORING OF BUILDING STRUCTURES – THEORETICAL CASE STUDY
Bayer J., pages 122 - 125
PRODUCING A LAYER OF IRON FE-CR-C-NB UNDER CONDITIONS OF INTENSE HEAT RECEPTION
Bęczkowski R., Cebulski J., Pasek D., Gucwa M., pages 126 - 129
POSSIBILITY OF DAMPING PRESSURE PULSATIONS IN BALANCING CONTROL VALVES
Bednář L., Tajč L., Miczán M., Mrózek L., Hoznedl M., pages 130 - 133
VERIFICATION OF FAST ALGORITHM FOR CROSS-ROLL STRAIGHTENING
Benešovský M., Návrat T., Petruška J., pages 134 - 137
FORMATION CONTROL OF MOBILE ROBOTS UNDER ROS
Besseghieur K., Kaczmarek W., Panasiuk J., Prusaczyk P., pages 138 - 141
DETERMINATION OF BOUNDARY CONDITIONS FOR THE OPTIMIZATION PROCESS OF BLAST MITIGATION SEAT SHOCK ABSORBERS
Bienioszek G., Kciuk S., pages 142 - 145
APPLICATION OF FRACTIONAL CALCULUS IN HARMONIC OSCILATOR
Blasiak M., Blasiak S., pages 146 - 149
THE APPLICATION OF INTEGRAL TRANSFORMS TO SOLVING PARTIAL DIFFERENTIAL EQUATIONS OF THE FRACTIONAL ORDER
Blasiak M., Blasiak S., pages 150 - 153
HEAT TRANSFER IN NON-CONTACTING FACE SEALS USING FRACTIONAL FOURIER LAW
Blasiak S., pages 154 - 157
HEAT TRANSFER MODEL FOR THE WAVY-TILT-DAM MECHANICAL SEALS USING GREEN’S FUNCTION METHOD
Blasiak S., pages 158 - 161
STRESS ANALYSIS OF PART OF THE WELDED STRUCTURE
Blatnická M., Blatnický M., Sága M., Kubiak M., pages 162 - 165
DESIGN OF A ROBOT MANIPULATOR WORKING SCREW REVOLUTIONS
Blatnický M., Dižo J., Blatnická M., Svoboda M., pages 166 - 169
KINEMATICS AND DYNAMICS OF THE MOVEMENT OF THE SELECTED CONSTRUCTIONS OF THE DISC CUTTING ASSEMBLIES
Bochat A., Zastempowski M., pages 170 - 173
MECHANICAL PROPERTIES OF MATERIALS OBTAINED BY 3D-PRINTING TECHNOLOGY
Bochnia J., pages 174 - 177
RELAXATION OF MATERIALS OBTAINED USING POLYJET TECHNOLOGY
Bochnia J., pages 178 - 181
VISUAL DIAGNOSTICS OF RAIL FASTENING SYSTEM AS A METHOD TO IMPROVE SAFETY
Bojarczak P., Nowakowski W., Łukasik Z., pages 182 - 185
OPTIMAL REPAIR AND REINFORCEMENT OF BAR STRUCTURES USING FINITE TOPOLOGY VARIATIONS
Bojczuk D., Szteleblak W., pages 186 - 189
INHOMOGENEOUS MATERIAL PROPERTIES ASSIGNMENT TO FINITE ELEMENT MODELS OF BONE: A SENSITIVITY STUDY
Borák L., Marcián P., pages 190 - 193
ACCURACY OF THE VISUAL MEASUREMENT SYSTEM OF BENT PIPES
Borkowski K., Janecki D., Zwierzchowski J., pages 194 - 197
ASSESSMENT OF THE VOLUME OF CROP BY THE WINDROW’S MEASUREMENT
Borowski S., Rama R., Knopik L., Kaszkowiak J., pages 198 - 201
COMPARING TURBULENCE MODELS FOR GAS-PARTICLE MIXTURE PNEUMATIC CONVEYING
Borsuk G., Wydrych J., Pochwala S., pages 202 - 205
ON PARELLELIZATION OF LINEAR SYSTEM EQUATION SOLVER IN FINITE ELEMENT SOFTWARE
Bošanský M., Patzák B., pages 206 - 209
MODIFICATION OF THE INTAKE MANIFOLD OF A COMBUSTION ENGINE
Brabec P., Reichrt K., pages 210 - 213
MODEL OF CAR SUSPENSION WITH PARAMETRIC UNCERTAINTY
Brezina L., Losak P., pages 214 - 217
COMPUTATIONAL ANALYSIS OF SERVICEABILITY LIMIT STATE OF BEAMS REINFORCED WITH FRP BARS
Brózda K., Major M., Selejdak J., pages 218 - 221
REDESIGN OF A WAVE ENERGY CONVERTER IN FERROCEMENT
Bucci V., Marino A., Mauro F., Sandron C., Mattiazzo G., pages 222 - 225
MODELLING OF STANDARD FIRE TEST
Cabová K., Lišková N., Novotná P., Benýšek M., Zeman F., Wald F., pages 226 - 229
THE USE OF WELDING FOR FORMING FEAL COATING ON S235
Cebulski J., Bęczkowski R., Pasek D., pages 230 - 233
AIRCRAFT WING FLUTTER ASSESSMENT CONSIDERING DAMAGE TOLERANCE - BASED FAILURE STATES
Čečrdle J., Raška J., pages 234 - 237
THE INFLUENCE OF THE LENGTH OF TRAJECTORY OF SCARA MANIPULATOR DUTY CYCLE ON ELECTRICITY CONSUMPTION
Cekus D., Skrobek D., pages 238 - 241
ELECTROMAGNETIC ENERGY HARVESTER WITH MECHANICAL AMPLIFIER FOR TRANSLATIONAL KINETIC
Černý M., Dzurilla M., Musil M., pages 242 - 245
A SHORT WAVE LIMIT OF THE FREQUENCY EQUATION FOR PLANE-STRESS NONAXISYMMETRIC DISC MOTIONS
Červ J., Valeš F., Adámek V., pages 246 - 249
STRUCTURAL MODELLING OF THE STRENGTH PROPERTIES OF POLYMER COMPOSITES STRUCTURAL MODELLING OF THE STRENGTH PROPERTIES OF POLYMER COMPOSITES
Chatys R., Miśków G., Miśków J., pages 250 - 253
NUMERICAL ANALYSIS OF POLYMER COMPOSITE BEND TESTS MADE BY VACUUM BAGGING
Chatys R., Piernik K., pages 254 - 257
NONLINEAR VIBRATION – STOCHASTIC APPROACH
Cienciala J., Frydrýšek K., Podešva J., pages 258 - 261
DESIGNATION THE VELOCITY OF CESSNA 172 AIRCRAFT BASED ON GPS DATA IN FLIGHT TEST
Ćwiklak J., Krasuski K., Jafernik H., pages 262 - 265
APPLICATIONS OF THE NEW METHOD OF THE LYAPUNOV EXPONENTS ESTIMATION
Dabrowski A., Balcerzak M., Pikunov D., pages 266 - 269
STUDY OF THE POSSIBILITY OF USE OF BIOELECTRIC SIGNALS TO WIRELESS REMOTE CONTROL OF THE ELECTRO-PNEUMATIC POSITIONING SYSTEMS
Dindorf R., Wos P., Pawelec K., pages 270 - 273
FLUID FLOW MEASUREMENTS OF 5P4E BY PARTICLE TRRACKING VELOCIMETRY
Dočkal K., Šperka P., Křupka I., Hartl M., pages 274 - 277
TESTING THE POSITIONING ACCURACY AND REGULARITY OF THE MOTION THREADED MECHANISM FEED DRIVE
Drahorádová L., Moravec J., Andrlík V., pages 278 - 281
THE EFFECT OF BODY WEIGHT UNLOADING ON KINEMATIC GAIT PARAMETERS DURING TREADMILL WALKING
Duda S., Gembalczyk G., Jureczko P., pages 282 - 285
JITTER ANALYSIS OF MQTT PROTOCOL FRAMES IN MOBILE ROBOT CONTROL SYSTEM
Dudek D., Kazala R., Straczynski P., pages 286 - 289
COMPUTATIONAL PERFORMANCE OF A DSG-BASED ISOGEOMETRIC BEAM ELEMENT
Dvořáková E., Patzák B., pages 290 - 293
QUICK PROTOTYPING OF MANIPULATOR CONTROL SYSTEM WITH PLC CONTROLLER
Dzierżek K., Rećko M., Pietrala D. S., pages 294 - 297
THE DYNAMICS OF THE GUIDE ARRANGEMENT BEING AN ELEMENT OF THE LAUNCHER INSTALLED ON A COMBAT VEHICLE
Dziopa Z., Nyckowski M., pages 298 - 301
MITIGATION OF MESH DEPENDENCY IN PROBABILISTIC FINITE ELEMENT SIMULATION OF QUASIBRITTLE FRACTURE
Eliáš J., Le J. -L., pages 302 - 305
CALCULATION OF SHELL STRUCTURES BY USING LAYERED MODEL
Fiedler J., Koudelka T., pages 306 - 309
LYAPUNOV EXPONENTS – PRACTICAL COMPUTATION
Fischer C., Náprstek J., pages 310 - 313
BIOMECHANICS - AIRFLOW IN THE NASAL CAVITY AND THE NASAL SEPTUM PERFORATION
Frydrýšek K., Drábková S., Plášek M., pages 314 - 317
BIOMECHANICS - TESTING OF MECHANICAL AND UTILITY PROPERTIES OF BOTTLES FOR REDON DRAINAGE
Frydrýšek K., Dvořák L., pages 318 - 321
ENDURANCE LIMIT OF FRP COMPOSITES USED FOR REINFORCEMENT OF CONCRETE STRUCTURES
Gajdosova K., Sonnenschein R., pages 322 - 325
THE CONTROL PROCESS OF A SCANNING AND TRACKING IR SEEKER USING INVERSE DYNAMICS
Gapiński D., Szmidt P., pages 326 - 329
SENSITIVITY INVESTIGATIONS OF THE LANE CHANGE AUTOMATED PROCESS
Gidlewski M., Jemioł L., Żardecki D., pages 330 - 333
VALIDATION OF THE FEM-BASED STRESS ANALYSIS OF AN INNOVATIVE LOAD-BEARING STRUCTURE OF AIR-ASSISTED SEED DRILLS WITH ELECTRONIC SEEDING CONTROL
Gierz Ł., pages 334 - 337
EXACT 3-NODED TIMOSHENKO BEAM FINITE ELEMENT WITH ENHANCED STRAIN FIELD – A MAGIC ROLE OF GAUSS POINTS
Gilewski W., Obara P., pages 338 - 341
THE INFLUENCE OF ORTHOTROPY LEVEL FOR PERPENDICULAR TO GRAIN STRESSES IN GLULAM DOUBLE TAPERED BEAMS
Gilewski W., Pełczyński J., pages 342 - 345
COORDINATIVE PATTERNS AND GAIT STABILITY ACCESSED BY NONLINEAR DYNAMICS APPROACH: A PRELIMINARY STUDY
Goethel F. M., Mrozowski J., Awrejcewicz J., pages 346 - 349
EXPERIMENTAL ANALYSIS OF EFICIENCY OF MASS DAMPERS
Gołębiowska I., Dutkiewicz M., pages 350 - 353
MECHANICAL DAMPERS ON OVERHEAD POWER LINES
Gołębiowska I., Dutkiewicz M., Usewicz B., pages 354 - 357
TURBULENCE IMPACT ON THE CONTROL OF GUIDED BOMB UNIT
Grzyb M., Stefański K., pages 358 - 361
IMPLEMENTATION OF INTERACTING CREEP AND FATIGUE UNDER THERMO-MECHANICAL LOADING
Had J., pages 362 - 365
EFFECTS OF TURBULENCE IN FE MODEL OF HUMAN VOCAL FOLDS SELF-OSCILLATION
Hájek P., Švancara P., Horáček J., Švec G. J., pages 366 - 369
CALDERÓN’S INVERSE PROBLEM IN CIVIL ENGINEERING
Havelka J., Sýkora J., Kučerová A., pages 370 - 373
PRINCIPLE OF THE ROLLING CONTACT FATIGUE FORMATION
Hejnova M., pages 374 - 377
GFRP REINFORCEMENT IN CONCRETE – FACTORS AFFECTING BOND PROPERTIES
Hollý I., Sonnenschein R., pages 378 - 381
EXPERIMENTAL MODELLING OF PHONATION USING ARTIFICIAL MODELS OF HUMAN VOCAL FOLDS AND VOCAL TRACTS
Horáček J., Radolf V., Bula V., Košina J., pages 382 - 385
WIND FLOW AROUND HIGH-RISE BUILDINGS AND ITS INFLUENCE ON THE PEDESTRIAN COMFORT
Hubova O., Konecna L., pages 386 - 389
EXAMINATION OF THE BASIC GEOMETRICAL PARAMETERS OF THE LOWER RESPIRATORY TRACT OF THE HUMAN AND ITS SIMPLIFIED COMPUTATIONAL MODEL
Hynek P., Vampola T., pages 390 - 393
DESIGN AND OPTIMIZATION OF SUPPORTING STRUCTURE OF A MULTIPURPOSE HIGH-RISE BUILDING WITH RESPECT TO THE WIND LOAD
Ivankova O., Meri D., Vojtekova E., pages 394 - 397
A HIGH-RISE BUILDING - INFLUENCE OF CHANGE OF SOIL STIFFNESS ON HORIZONTAL AND VERTICAL DEFLECTIONS
Ivankova O., Valasik A., Konecna L., pages 398 - 401
SYSTEMS CONCEPTION OF PROBLEM-SOLVING
Janíček P., pages 402 - 405
MODELLING – A TOOL FOR PROBLEM-SOLVING
Janíček P., Fuis V., pages 406 - 409
ROLE OF RANDOM FACTORS IN NONLINEAR REGRESSION: A CASE STUDY FOR ESTIMATION OF THERMOPHYSICAL PARAMETERS
Janouchová E., Kučerová A., Sýkora J., pages 410 - 413
DETERMINATION OF RIGIDITY AND DAMPING PARAMETERS OF HYDRODYNAMIC BEARINGS
Jarzyna T., pages 414 - 417
VERIFICATION OF A NEW THERMAL CALCULATION METHOD BY INDUSTRIAL RADIANT CHAMBER MEASUREMENTS
Jegla Z., Reppich M., pages 418 - 421
STATIC NUMERICAL ANALYSIS OF A HYDRAULIC CURING PRESS
Jirásko J., Max A., Bezdekova J., pages 422 - 425
ANALYSIS OF RELATIONSHIP BETWEEN POSTURAL STABILITY AND DEGREE OF VISUAL IMPAIRMENT
Jureczko M., Jureczko P., pages 426 - 429
THE CALIBRATION PROGRAM FOR THE HYPOPLASTIC SAND MODEL
Kadlíček T., Janda T., Šejnoha M., pages 430 - 433
FATIGUE CRACK INITIATION AND GROWTH IN 316L STEEL IN TORSIONAL CYCLIC LOADING
Karoľ M., Chlupová A., Mazánová V., Kruml T., pages 434 - 437
IMPACT OF SUPERCHARGING ON THE NOISE LEVEL IN BIOGAS ENGINES
Kaszkowiak J., Markiewicz-Patalon M., Borowski S., Dorszewski P., pages 438 - 441
DESIGN OF NEW PARAMETERS FOR EVALUATION OF LOAD CAPACITY OF SEMI-SHELL STRUCTURES
Katrňák T., pages 442 - 445
PREOPERATIVE PLANNING OF CORRECTION OF CRANIAL DEFORMATIONS USING DISTRACTORS
Kawlewska E., Zarwańska M., Larysz D., Wolański W., Gzik M., pages 446 - 449
AXISYMMETRIC DEFORMATION OF AN ELASTIC MEDIUM WEAKENED BY AN ANNULAR CRACK
Kebli B., Baka Z., pages 450 - 453
STATIC CHECKING COMPUTATION OF A LATHE TAILSTOCK
Keckstein T., Bezděková J., Votápek P., pages 454 - 457
WAYSIDE DIAGNOSIS OF METRO WHEELSETS USING ACOUSTIC SENSOR DATA AND ONE-PERIOD ANALYSIS
Kilinc O., Vágner J., pages 458 - 461
NUMERICAL SIMULATION OF STEAM FLOW AROUND VIBRATING TURBINE BLADES
Klečková J., Hamza J., pages 462 - 465
ENERGY TRANSFORMATION IN TURBULENT FLOW INSIDE REVERSIG CHAMBER
Kłosowiak R., Bartoszewicz J., Urbaniak R., pages 466 - 469
SOME REMARKS ON PREVENTIVE REPLACEMENT MODEL
Knopik L., Migawa K., Peszyński K., Wawrzyniak S., pages 470 - 473
AN EXPLICIT TIME SCHEME WITH LOCAL TIME STEPPING FOR ONE-DIMENSIONAL WAVE PROPAGATION IN A BIMATERIAL BAR
Kolman R., Cho S. S., Gonzalez J. G., Park K. C., Berezovski A., pages 474 - 477
EVALUATION OF KNEE JOINT STIFFNESS IN CHILDREN WITH CEREBRAL PALSY
Konopelska A., Jureczko M., pages 478 - 481
AN INVESTIGATION OF MASS TRANSFER IN A VORTEX SHEDDING PAST SQUARE CYLINDER
Kořínek T., Petříková M., pages 482 - 485
A CONTROL WITH THE USE OF LQR MODIFIED METHOD IN THE GYROSCOPE SYSTEM OF TARGET TRACKING
Koruba Z., Krzysztofik I., pages 486 - 489
EFFECT OF CONTACT PARAMETERS ON THE PATTERN OF VEHICLE COLLISIONS WITH A ROUND PILLAR
Kostek R., Aleksandrowicz P., pages 490 - 493
IDENTIFICATION OF THE PARAMETERS OF VEHICLE CONTACT WITH A RIGID BARRIER FROM A CRASH TEST
Kostek R., Aleksandrowicz P., pages 494 - 497
INTELLIGENT SCHEDULED MAINTENANCE METHODOLOGY FOR GENERAL AVIATION STRUCTURES BASED ON MSG-3 AND MULTIPLE- CRITERIA DECISION MAKING ANALYSIS
Koštial R., Janhuba L., Hlinka J., pages 498 - 501
NUMERICAL MODELLING OF EXPANSIVE CLAYS
Koudelka T., Krejčí T., Kruis J., pages 502 - 505
ANALYSIS OF THE MANUFACTURE PERTURBATIONS OF THE TOTAL HIP REPLACEMENT
Koukal M., pages 506 - 509
THE INFLUENCE OF CONTACT REGION ON PROBABILITY OF CERAMICS FRACTURE
Kovář J., pages 510 - 513
PROBABILITY NONLINEAR ANALYSIS OF THE FAILURE OF THE NPP HERMETIC STEEL DOOR DUE TO ACCIDENTAL EXTREME OVERPRESSURE
Králik J., pages 514 - 517
PROBABILISTIC ESTIMATION OF A BRIDGE FATIGUE LIFE IN ACCORDANCE TO fib MODEL CODE 2010
Krejsa J., Sýkora M., pages 518 - 521
THE EVALUATION OF HOKUYO URG-04LX-UG01 LASER RANGE FINDER DATA
Krejsa J., Vechet S., pages 522 - 525
ON THE CHOICE OF GEOMETRICAL IMPERFECTIONS IN GMNIA STRENGTH CALCULATIONS OF THIN-WALLED STRUCTURES
Kriváček J., Sadovský Z., pages 526 - 529
APPLICATION OF THE SLIDING CONTROLLER FOR THE GYROSCOPE SYSTEM OF THE ANTI-AIRCRAFT MISSILE
Krzysztofik I., Koruba Z., pages 530 - 533
METHODOLOGY FOR PREDICTING DYNAMIC BEHAVIOUR OF MACHINE TOOLS BASED ON A VIRTUAL MODEL
Kšica F., Vetiška J., Hadaš Z., pages 534 - 537
DYNAMIC VISCOSITY OF COMMERCIALLY AVAILABLE MAGNETORHEOLOGICAL FLUIDS
Kubík M., Macháček O., Strecker Z., Roupec J., Mazůrek I., pages 538 - 541
SIMULATION OF THE SMALL PUNCH TEST OF AISI 316L AUSTENITIC STEEL
Kubík P., Petruška J., Hůlka J., Šebek F., pages 542 - 545
SHAFT VIBRATION OF THE TRUCK
Kučera P., Píštěk V., pages 546 - 549
EFFECTIVE HEAT AND MOISTURE TRANSPORT PROPERTIES OF SPRUCE
Kucíková L., Vorel J., Sýkora J., Šejnoha M., pages 550 - 553
THERMOMECHANICAL MODELIG AND ANALYSIS OF THE THREAD ROLLING PROCESS WITH ELECTROCONTACT HEATING
Kukielka K., Kukielka L., pages 554 - 557
DYNAMICS OF MULTIBODY SURGICAL ROBOTIC SINGLE INCISION LAPAROSCOPIC SURGERY TOOL
Kulesza Z., Trochimczuk R., pages 558 - 561
ALTERNATIVE POSSIBILITIES OF BIAXIAL TESTING OF FIBER AND FABRIC MATERIALS IN NONSTANDARD CONDITIONS
Kulhavý P., Syrovátková M., Petrů M., pages 562 - 565
SEGMENTATION OF HUMAN MOTION ACCELERATION WITH PROBABILISTIC CLASSIFIER
Kumpán P., pages 566 - 569
EFFECT OF LOOP DIAMETER ON TWO-PHASE NATURAL CIRCULATATION LOOP PERFROMANCE
Kupireddi K. K., Sai Sudheer S. V., Balasubramanian K., pages 570 - 573
ANALYSIS OF CERAMIC-METALLIC COMPOSITES OF BALLISTIC RESISTANCE ON SHOTS BY 5.56 MM AMMUNITION
Kurzawa A., Bocian M., Jamroziak K., Pyka D., pages 574 - 577
ATMOSPHERIC GAS FLOW AROUND AND INSIDE HIGH HALLS SUPPORTED WITH THE SIMULATION OF THE FANS
Kyncl M., Pelant J., pages 578 - 581
SHEAR FORCES OF THE APPROACH SLABS OF THE ROAD BRIDGES
Laco K., Borzovič V., pages 582 - 585
KINEMATICS AND WORKSPACE ANALYSIS FOR A 6-DOF PARALLEL MANIPULATOR WITH COAXIAL CTUATED ARMS
Laski P. A., pages 586 - 589
FAILURE INDEX BASED TOPOLOGY OPTIMIZATION FOR MULTIPLE PROPERTIES
Löffelmann F., pages 590 - 593
A NEW METHOD OF MAGNETORHEOLOGICAL DAMPER QUALITY EVALUATION
Macháček O., Kubík M., Novák P., pages 594 - 597
DAMAGE TO ADHESIVE SINGLE LAP JOINT MADE OF MATERIALS WITH DIFFERENT PROPERTIES UNDER STATIC LOADING CONDITIONS
Maćkowiak P., Ligaj B., pages 598 - 601
INNOVATIVE CONCRETE-POLYURETHANE COMPOSITE BLOCKS LOCATED IN THREE-LAYER WALL – THERMAL NUMERICAL ANALYSIS
Major M., Kuliński K., Major I., pages 602 - 605
STABILITY MARGINS EXPERIMENTAL SEARCH OF AN AEROELASTIC SYSTEM
Malínek P., pages 606 - 609
SIMULATION OF PILOT LOAD DURING EMERGENCY LANDING CONDITIONS
Mališ M., Šplíchal J., pages 610 - 613
THERMO-MECHANICAL ANALYSIS OF A FUNCTIONALLY GRADED ANNULAR FIN
Mallick A., Ranjan R., pages 614 - 617
ANALYSIS OF BOUNDARY CONDITIONS IN FINITE ELEMENT SUB-MODELS OF INTERACTION OF HUMAN MANDIBLE WITH DENTAL IMPLANT
Marcián P., Florian Z., Horáčková L., Borák L., pages 618 - 621
THERMO-VACUUM TEST CHAMBER DEVELOPMENT FOR HEAT SWITCH TESTING IN SIMULATED MARTIAN CONDITIONS
Mašek J., Brožek P., Horák M., pages 622 - 625
RELIABILITY ASSESSMENT OF THE PRETENSIONED BOLTS BASED ON PROBABILITY
Maťas M., Frydrýšek K., pages 626 - 629
RANS CALCULATIONS ON SUBMERGED BODIES
Mauro F., Cerni P., Nabergoj R., pages 630 - 633
DETERMINATION OF NON-LINEAR ROLL DAMPING COEFFICIENTS FROM MODEL DECAYTEST
Mauro F., Nabergoj R., pages 634 - 637
ANALYSIS OF A BOOM CONVEYOR
Max A., Hynek M., Řehounek L., pages 638 - 641
IMPACT OF MINERAL CONTENT IN HUMAN TRABECULAR BONE ON ITS ELASTIC PROPERTIES
Mazurkiewicz A., pages 642 - 645
IMPACT OF MINERAL CONTENT IN HUMAN TRABECULAR BONE ON ITS STATIC AND FATIGUE PROPERTIES
Mazurkiewicz A., pages 646 - 649
THICK-WALLED COMPOSITE PIPES UNDER BENDING
Menshykov O., Menshykova M., Guz I. A., pages 650 - 653
SIMULATION OF THE MODEL OF TECHNICAL OBJECT AVAILABILITY CONTROL
Migawa K., Knopik L., Neubauer A., Perczyński D., pages 654 - 657
THE METHOD OF RISK ASSESSMENT IN TRANSPORT SYSTEMS
Migawa K., Knopik L., Sołtysiak A., Kolber P., pages 658 - 661
ON EFFICIENCY OF QUASICONTINUUM SIMULATION OF CRACK PROPAGATION IN ELASTIC-BRITTLE DISORDERED LATTICES
Mikeš K., Jirásek M., pages 662 - 665
EXPLICIT DYNAMIC FINITE ELEMENT ANALYSIS OF A FIRING PIN ASSEMBLY
Mochar D., Gabriel D., Masák J., Kopačka J., Kolman R., Plešek J., Hynek P., Vtípil J., pages 666 - 669
BEAM RESTED ON UNILATERAL ELASTIC FOUNDATION – (THEORY, EXPERIMENTS AND FINITE ELEMENT APPROACH)
Morávková Z., Tomečková I., Frydrýšek K., pages 670 - 673
SHAPING THE STRUCTURE OF LOW WATER-BINDER RATIO CEMENT PASTES
Mrozik Ł., pages 674 - 677
THE CONCEPT OF MOBILE SYSTEM OF ANALYSIS AND VISUALIZATION OF HUMAN GAIT PARAMETERS
Muraszkowski A., Szrek J., pages 678 - 681
MODELLING AND MEASUREMENT OF NON-UNIFORM ELASTOSTATIC TORSION OF HOLLOW CROSS-SECTION BEAMS
Murín J., Goga V., Kutiš V., Hrabovský J., Sedlár T., Paulech J., pages 682 - 685
PARAMETRIC INSTABILITY OF THE PLANE FREE SURFACE OF THE LIQUID IN CYLINDRICAL STORAGE TANKS
Musil M., Sivý M., pages 686 - 689
SHIFTING OF LHS DESIGN FOR SURROGATE MODELING
Myšáková E., Lepš M., pages 690 - 693
EXPERIMENTAL STUDIES ON FE3O4 NANOFLUID FLOWING THROUGH A CIRCULAR TUBE
Nagireddy P. D., Rao Srinivasa Ch., pages 694 - 697
NON-HOLONOMIC PLANAR AND SPATIAL MODEL OF A BALL-TYPE TUNED MASS DAMPING DEVICE
Náprstek J., Fischer C., pages 698 - 701
TESTING OF FULL STAGE MIXED-FLOW TURBINE FOR AUTOMOTIVE APPLICATIONS
Němec M., Jelínek T., Klíma J., pages 702 - 705
MODELING OF ROAD ROLLER DRIVE EQUIPPED WITH HYDROSTATIC RECOVERY OF KINETIC ENERGY
Němec Z., Nevrlý J., pages 706 - 709
MODELING OF CHLORIDE MIGRATION IN CONCRETE
Němeček J., Kruis J., Koudelka T., pages 710 - 713
MODIFICATIONS OF CONTROL ACTUATION SYSTEMS OF ATGM
Nocoń Ł., Koruba Z., pages 714 - 717
IMPACT OF STRENGTHENING OF THE ERECTOR SPINAE MUSCLE ON THE VALUES OF LOADS OF THE MUSKULOSKELETAL SYSTEM IN THE LUMBAR SPINE SECTION
Nowakowska K., Michnik R., Myśliwiec A., Chrzan M., pages 718 - 721
DESIGNATION OF THE MINIMUM THICKNESS OF MACHINED LAYER FOR THE MILLING PROCESS OF DURALUMIN PA6
Nowakowski Ł., Miko E., Skrzyniarz M., pages 722 - 725
MILLING WITH A TOOL WITH UNEVENLY DISTRIBUTED CUTTING PLATES
Nowakowski Ł., Miko E., Skrzyniarz M., pages 726 - 729
THE ANALYSIS OF RELATIVE OSCILLATION DURING FACE MILLING
Nowakowski L., Skrzyniarz M., Miko E., pages 730 - 733
THE ASSESSMENT OF THE IMPACT OF THE INSTALLATION OF CUTTING PLATES IN THE BODY OF THE CUTTER ON THE SIZE OF GENERATED VIBRATIONS AND THE GEOMETRICAL STRUCTURE OF THE SURFACE
Nowakowski L., Skrzyniarz M., Miko E., pages 734 - 737
SHAPING THE STARTING OF A HYDROSTATIC TRANSMISSION WITH PROPORTIONALLY CONTROLLED ELEMENTS
Osiński P., Stosiak M., pages 738 - 741
VERYFICATION OF VELOCITY MESURMENT METHODS BY HIGH SPEED CAMERA AND ACCELEROMETER ON EXAMPLE OF IMPACT TESTER
Osowski P., Wolski M., Piatkowski T., pages 742 - 745
EXPERIMENTAL STUDIES OF VIBRATION OF THE TECHNOLOGICAL DEVICE FOR ELECTROCHEMICAL MACHINING OF CURVILINEAR SURFACES
Paczkowski T., Sawicki J., pages 746 - 749
A MODIFIED MATHEMATICAL MODEL OF HUMAN VENTRICULAR CARDIOMYOCYTE INCORPORATING SEPARATE T-TUBULAR AND SURFACE DYADS AND SUBMEMBRANE SPACES
Pásek M., Bébarová M., Christé G., pages 750 - 753
NUMERICAL METHOD FOR DETERMINING THE MAIN FORCE OF BURNISHING ROLLING OF ROUGH CYLINDRICAL SURFACE WITH REGULAR PERIODICAL OUTLINES ASPERITIES
Patyk S., Patyk R., Kukiełka L., Kałduński P., Chojnacki J., pages 754 - 757
THE FORMATION OF ZONES OF THE COAL ARRAY VOLUMETRIC IMPREGNATION AS A RESULT OF THE VIBRATION IMPACT
Pavlenko M., pages 758 - 761
DETERMINATION OF THE NUMBER OF CYCLES FOR ASYNCHRONOUS PERIODIC MULTIAXIAL LOADINGS USING ENERGY BASED CUMULATIVE DAMAGE THEORY
Pejkowski Ł., pages 762 - 765
IMPACT OF FILTER CONTAMINATION ON EFFICIENCY AND EFFECTIVENESS OF AIR FILTER
Perz K., Rewolińska A., pages 766 - 769
EXPERIMENTAL VERIFICATION OF VELOCITY DISTRIBUTION IN DIFFERENT CROSS-SECTIONAL VENTILATION DUCTS
Peszyński K., Perczyński D., Smyk E., Kolber P., pages 770 - 773
EXPERIMENTAL AND NUMERICAL STUDY OF STAYED STEEL COLUMNS
Pichal R., Machacek J., pages 774 - 777
APPLICATION OF WOLFRAM MATHEMATICA PACKAGE TO CONTROL THE 6-DOF PARALLEL ROBOT
Pietrala D. S., Laski P. A., Bracha G. F., Dzierżek K., pages 778 - 781
UNMANNED AIRCRAFT VECHICLE DESIGN FOR TEMPERATURE FIELD ANALYSIS
Piwowarski D., Anweiler S., Ulbrich R., Tańczuk M., pages 782 - 785
NUMERICAL SIMULATIONS OF FREE SURFACE FLOWS USING A THREE-EQUATION MODEL
Plánička S., Vimmr J., pages 786 - 789
THE EFFECT OF VELOCITY PROFILE DEFORMATION OF AN AVERAGING PITOT TUBE THE EFFECT OF VELOCITY PROFILE DEFORMATION OF AN AVERAGING PITOT TUBE
Pochwała S., Wydrych J., Borsuk G., pages 790 - 793
MATHEMATICAL MODELLING OF ROTOR SYSTEMS WITH JOURNAL BEARINGS IN LIMIT CASES
Polach P., Hajžman M., Byrtus M., Dyk Š., Smolík L., pages 794 - 797
GUST ALLEVIATION OF NASA COMMON RESEARCH MODEL USING CFD
Prachař A., Hospodář P., Vrchota P., pages 798 - 801
INFLUENCE OF AN INTIAL IMPERFECTION ON THE LATERAL AND TORSIONAL BUCKLING OF A HYBRID BEAM
Pravdová I., Eliášová M., pages 802 - 805
ON THE ENERGY RELEASE RATE OF THE CRACK EMANATING FROM THE INCLUSION INTERPHASE
Profant T., Hrstka M., Klusák J., Keršner Z., pages 806 - 809
VIRTUAL PROTOTYPE APPLICATION TO HEAVY-DUTY VEHICLE GEARBOX CONCEPT
Prokop A., Řehák K., pages 810 - 813
RUNNING FLUTTER WAVES IN BLADES CASCADE
Půst L., Pešek L., pages 814 - 817
MECHANICAL BEHAVIOR OF A TITANIUM ALLOY TRABECULAR STRUCTURE
Řehounek L., Jíra A., Denk F., pages 818 - 821
THE ANTIPLANE PROBLEM FOR A STRIP WEAKENED BY A CRACK
Reut O. V., pages 822 - 825
NUMERICAL ANALYSIS FOR OPTIMAL LOCALIZATION OF GAS INLET IN A VENTURI MIXER
Romańczyk M., Elsner W., pages 826 - 829
TENSILE STRENGTH OF PURE IRON SAMPLES MANUFACTURED BY SELECTIVE LASER MELTING METHOD
Roupec J., Mazůrek I., Strecker Z., Kubík M., Macháček O., pages 830 - 833
SPECIAL ELEMENT FOR NUMERICAL MODELLING OF THE ROCK BOLT REINFORCEMENT
Runt D., Novotný J., Pruška J., pages 834 - 837
POLYURETHANE COMPOSITES WITH IMPROVED MECHANICAL PROPERTIES
Sądej M., Gierz Ł., pages 838 - 841
SIMULATION OF DAILY LIFE ACTIVITIES IN BIOMECHANICS
Sant Z., Mifsud L., Muscat C., pages 842 - 845
VERIFICATION OF MECHANISM´S FUNCTIONALITY FOR POSTIIONING THE CAR SEAT USING MSC.ADAMS
Sapietová A., Šulka P., Sapieta M., Domański T., pages 846 - 849
EXPERIMENTAL DETERMINATION OF VISCO-ELASIC PROPERTIES OF LAMINATED GLASS INTERLAYER
Schmidt J., Janda T., Šejnoha M., Valentin J., pages 850 - 853
DUCTILE FRACTURE CRITERIA IMPLEMENTATION AND CALIBRATION USING THE TENSION–TORSION TESTS
Šebek F., Petruška J., Kubík P., pages 854 - 857
LOCATION OF LEAKS IN THE WATER SUPPLY NETWORK
Semkło Ł., Frąckowiak A., Ciałkowski M., pages 858 - 861
INFLUENCE OF CERAMIC FOAM PARAMETERS ON THE FRACTURE BEHAVIOUR UPON THE TENSILE TEST
Ševeček O., Majer Z., Kotoul M., pages 862 - 865
EFFECT OF CRACKS CLOSURE IN PLATES AND SHELLS UNDER COMBINED TENSION AND BENDING
Shatskyi I., Makoviichuk M., Perepichka V., Dalyak T., pages 866 - 869
MODELLING OF ENERGY DISSIPATION IN SHELL DAMPERS
Shatskyi I., Popadyuk I., Velychkovych A., pages 870 - 873
THE ADVANTAGES OF A NEW HYDRAULIC CYLINDER DESIGN WITH A CONTROL SYSTEM
Siwulski T., Warzyńska U., pages 874 - 877
THIN WALLED PIPE CRUSHED IN JAWS
Sławski S., Duda S., Machoczek T., pages 878 - 881
TUBULAR AIR DEFLECTOR IN VENTILATION DUCTS
Smyk E., Mrozik D., Wawrzyniak S., Peszyński K., pages 882 - 885
AXISYMMETRIC VALVE WITH SYNTHETIC JET ACTUATOR
Smyk E., Wawrzyniak S., Perczyński D., Kolber P., pages 886 - 889
FORCED VIBRATION ANALYSIS OF PRESTRESSED EULER-BERNOULLI BEAM WITH DISCONTINUITIES BY MEANS OF DISTRIBUTIONS WITHOUT USING MODAL ANALYSIS
Sobotka J., pages 890 - 893
INSTABILITTY OF A STEPPED COLUMN LOADED BY THE EXTERNAL FOLLOWER FORCE
Sokół K., pages 894 - 897
OPTIMUM DESIGN OF TUNED LIQUID COLUMN DAMPER FOR HIGH-RISE BUILDING
Sokol M., Lamperová K., Venglár M., Hérnandez Carrasco L. H., pages 898 - 901
LOAD BEARING TEST OF WALL FROM HOLLOW GLASS BLOCKS USING VITRALOCK INSTALLATION SYSTEM
Sokol Z., Fíla J., Eliášová M., pages 902 - 905
ACOUSTIC CLIMATE IN THE CABINS AS A FACTOR OF REBUILDING EFFECTIVENESS OF LONG TERM OPERATED BUCKET WHEEL EXCAVATORS – A CASE STUDY
Sokolski M., Sokolski P., pages 906 - 909
ON WEAR PROCESSES IN PIN JOINTS IN CATERPILLARS OF LARGE-SIZE WORKING MACHINES
Sokolski P., pages 910 - 913
COMPUTER AIDED OPTIMIZATION OF A NOZZLE IN AROUND-THE-PUMP FIRE SUPPRESSION FOAM PROPORTIONING SYSTEM
Sosnowski M., pages 914 - 917
THE USE OF GYROSCOPIC EXECUTIVE SYSTEM FOR HOMING OF THE MISSILE ON THE AERIAL TARGET
Stefański K., Chatys R., Stefańska A., pages 918 - 921
MODELING OF PRESTRESSED BOLT CONNECTION IN LS-DYNA CRASH TEST ANALYSIS OF ROAD INFRACTRUCTURE
Stopel M., Cichański A., Skibicki D., pages 922 - 925
COMPUTATIONALLY EFFICIENT MODEL OF THE HUMAN VOCAL FOLD
Štorkán J., Vampola T., Horáček J., pages 926 - 929
MODELLING OF FLOW IN LINEAR BLADE CASCADE WITH THICK TRAILING EDGE AT A LOWER REYNOLDS NUMBER
Straka P., Příhoda J., pages 930 - 933
DESIGN OF FAST MAGNETORHEOLOGICAL DAMPER USING SOFT MAGNETIC COMPOSITES
Strecker Z., Strmiska T., Roupec J., Kubík M., Macháček O., pages 934 - 937
RETESTED RUNOUT SPECIMENS IN FATIGUE RESEARCH
Strzelecki P., pages 938 - 941
PROPOSAL OF HYPERELASTIC PROPORTIONAL DAMPING AS DISSIPATED ENERGY MODEL OF HARD RUBBERS
Šulc P., Pešek L., Bula V., Košina J., Cibulka J., pages 942 - 945
COUPLED SIMULATION FOR FIRE-EXPOSED STRUCTURE USING CFD AND THERMO-MECHANICAL MODELS
Šulc S., Šmilauer V., Wald F., pages 946 - 949
ANALYSIS OF NON-STATIONARY VIBRATION MODE MECHANICAL DEVICE
Šulka P., Sapietová A., Dekýš V., Sapieta M., pages 950 - 953
STRESS ANALYSIS OF THE TOTAL REPLACEMENT OF THE TRAPEZIOMETACARPAL JOINT
Svojanovský T., Trtík L., pages 954 - 957
CONSTRUCTION OF RANDOM FIELD BASED ON IMAGE ANALYSIS
Sýkora J., Kučerová A., Zeman J., pages 958 - 961
TEMPERATURE ANALYSIS DEPENDENCE IN THE VICINITY OF THE BRAKE DISK
Szews M., Perczyński D., Knopik L., Wawrzyniak S., pages 962 - 965
BIOMECHANICAL STUDY OF THE CERVICAL SPINE WITH DISC IMPLANTS: A FINITE ELEMENT ANALYSIS
Szkoda K., Gałąska P., Żak M., Pezowicz C., pages 966 - 969
THE ANALYSIS OF SELECTION OPTIMAL PARAMETERS OF PID CONTROLLERS FOR A MODIFIED ARTILLERY-MISSILE SYSTEM
Szmidt P., Gapiński D., Koruba Z., pages 970 - 973
MODELLING AND SIMULATION RESEARCHES OF DYNAMICS OF TRANSLATIONAL PARALLEL MECHANISM
Szrek J., Bałchanowski J., pages 974 - 977
DYNAMIC CHARACTERISTICS OF PNEUMATIC ARTIFICIAL MUSCLES
Takosoglu J. E., pages 978 - 981
ANALYSIS OF SIZE EFFECT FOR NOTCHED MINI SPECIMENS MADE OF STAINLESS STEEL
Tomaszewski T., pages 982 - 985
EVALUATION OF DEFORMATIONS OF THICK-LAYER GLUED JOINTS APPLIED IN CONSTRUCTION OF RAIL VEHICLES
Topolinski T., Ligaj B., Mazurkiewicz A., Miterka S., pages 986 - 989
ALL-PASS FILTERS AS A TOOL FOR CONVERTING A POSITIVE FEEDBACK TO A NEGATIVE FEEDBACK WHEN CONTROLLING WEAKLY DAMPED SYSTEMS
Tůma J., Šuránek P., Mahdal M., pages 990 - 993
BIOMECHANICS – VERIFICATION OF FORCE CHARACTERISTICS OF A DEVICE FOR REDUCTION OF BONE FRAGMENTS IN PATIENTS WITH FINGER FRACTURES
Učeň O., Frydrýšek K., Fojtík F., Bialy L., Pleva L., pages 994 - 997
THREE-POINT BENDING FATIGUE DAMAGE MECHANISMS ASSOCIATED WITH THE DIFFERENT STRUCTURE OF AL-MG CAST ALLOYS
Uhríčik M., Oravcová M., Palček P., Chalupová M., Kuchariková L., pages 998 - 1001
MODELING OF FRICTIONAL STICK SLIP EFFECT LEADING TO DISC BRAKE NOISE VIBRATION AND HARSHNESS
Úradníček J., Kraus P., Musil M., Bachratý M., pages 1002 - 1005
INFLUENCE OF LONGITUDINAL ELASTIC SUPPORT ON STABILITY OF A PARTIALLY TENSIONED COLUMN
Uzny S., Osadnik M., pages 1006 - 1009
EFFECTIVE ELASTIC AND STRENGTH PROPERTIES OF UNIDIRECTIONAL FIBROUS CERAMIC COMPOSITES
Valentová S., Vorel J., Šejnoha M., pages 1010 - 1013
WEAK AXIS BUCKLING - ELASTIC RESISTANCE OF A COLUMN
Valeš J., Kala Z., pages 1014 - 1017
INFLUENCE OF THE NASAL CAVITIES TO HUMAN VOICE QUALITY
Vampola T., Horáček J., pages 1018 - 1021
EXPERT SYSTEM SHELL ARCHITECTURE BASED ON DECISION NETWORK
Vechet S., Krejsa J., Chen K.-S., pages 1022 - 1025
INFLUENCE OF COMPRESSIVE STRESS ON SHEAR FORCE DISTRIBUTION IN BRIDGE DECK SLABS
Vida R., Halvonik J., pages 1026 - 1029
ESTIMATION OF MINOR LOSSES IN A NATURAL CIRCULATION HELIUM LOOP
Világi F., Knížat B., Urban F., Olšiak R., Mlkvik M., Ridzoň F., Mlynár P., pages 1030 - 1033
CONCENTRATION DISTRIBUTION AND SLIP VELOCITY OF COARSE-PARTICLE-WATER MIXTURE IN HORIZONTAL AND INCLINED PIPE SECTIONS
Vlasák P., Chára Z., Konfršt J., pages 1034 - 1037
SOME ENERGY RELATIONS OF THE SELF-EXCITED PROFILE VIBRATION IN FLOWING FLUID
Vlček V., Zolotarev I., Kozánek J., Šidlof P., Štěpán M., pages 1038 - 1041
BACK ANALYSIS FOR DETERMINATION OF TENSION-SOFTENING DIAGRAM
Vorel J., Kabele P., pages 1042 - 1045
PLATFORM STABILIZED BY MEANS OF TWO GYROSCOPES AND DAMPED WITH MAGNETORHEOLOGICAL DAMPER¨
Votrubec R., pages 1046 - 1049
SIMPLIFIED OSCILLATORY BOUNDARY CONDITION FOR EFFICIENT CFD SIMULATION OF AFC EFFECT
Vrchota P., Prachař A., Hospodář P., Dolgopyat D., Seifert A., pages 1050 - 1053
TESTING THE STRENGTH OF THE ADHESIVE CONNECTION IN SPECIMEN - MONOTONIC TENSILE AND SHEAR WITH UNDER VARIABLE LOAD
Wirwicki M., Andryszczyk M., Andrzejewska A., Topoliński T., pages 1054 - 1057
VARIANTS OF UPPER LIMB MOTION INDEX CALCULATIONS IN THE ASSESSMENT OF UPPER LIMB MOTION DYSFUNCTION
Wodarski P., Michnik R., Gzik M., Jurkojc J., Bieniek A., Nowakowska K., pages 1058 - 1061
ROTARY MOTION SELECTED CONTROL METHODS ANALYSIS FOR PADDLE SORTERS ARMS
Wolski M., Piatkowski T., Osowski P., pages 1062 - 1065
A SEMI-ACTIVE PNEUMATIC SUSPENSION OF THE WORKING MACHINE SEAT
Woś P., Dindorf R., pages 1066 - 1069
LEAK MEASURING SYSTEM OF COMPRESSED AIR IN PIPELINE
Woś P., Dindorf R., pages 1070 - 1073
ANALYSIS OF THE EROSIVE WEAR MODELING RESULTS OF THE PNEUMATIC CONVEYING SYSTEMS
Wydrych J., Borsuk G., Pochwała S., pages 1074 - 1077
NUMERICAL THERMAL COMPARISON OF HEAT SINK MATERIALS FOR AUTOMOTIVE LED HEADLAMPS
Zachar M., Guzej M., Horský J., pages 1078 - 1081
DETERMINATION OF THE STRESS - STRAIN STATE FOR INDUSTRIAL PIPELINE BASED ON ITS VIBRATION
Zachwieja J., Peszyński K., pages 1082 - 1085
APPLICATION OF HAMILTONIAN MECHANICS IN EXPONENTIALLY STABLE CONTROL OF ROBOTS
Záda V., pages 1086 - 1089
COMPREHENSIVE SERVICE OF CONFERENCE PARTICIPANTS USING AUTOMATIC IDENTIFICATION
Zajac P., Kowalczyk L., pages 1090 - 1093
MODELLING FORKLIFT TRUCK MOVEMENT IN THE VDI CYCLE AND THE POSSIBILITY OF ENERGY RECOVERY
Zajac P., Kwasniowski S., pages 1094 - 1097
RELIABILITY OF AUTOMATIC IDENTIFICATION SYSTEMS IN LOGISTICS SYSTEMS
Zajac P., Kwasniowski S., pages 1098 - 1101
FULL WIDTH WARP TENSION SENSOR
Žák J., pages 1102 - 1105
A FINITE ELEMENT STRESS ANALYSIS TO PREDICT THE RISK FACTORS OF AORTIC DISSECTION PRELIMINARY STUDIES
Żak M., Filipiak J., Płonek T., pages 1106 - 1109
REDUCTION OF THE ENERGY LOSSES BY APPLICATION OF CONTROLLABLE SQUEEZE FILM DAMPERS
Zapoměl J., Ferfecki P., Kozánek J., pages 1110 - 1113
DYNAMICS OF MOVEMENT IN SCISSOR-FINGER CUTTING ASSEMBLY
Zastempowski M., pages 1114 - 1117
FRICTION FORCES AND FRETTING WEAR IN REACTOR CORE BARREL COUPLINGS
Zeman V., Hlaváč Z., pages 1118 - 1121
FREE VIBRATION ANALYSIS OF LAMINATED GLASS BEAMS USING DYNAMIC EFFECTIVE THICKNESS AND OTHER APPROACHES
Zemanová A., Zeman J., Janda T., Šejnoha M., pages 1122 - 1125
MODELLING OF VIRUS VIBRATION WITH 3-D DYNAMIC ELASTICITY THEORY
Zhuravlova Z., Kozachkov D., Pliusnov D., Radzivil V., Reut V., Shpynarov O., Tarasova E., Nerukh D., Vaysfeld N., pages 1126 - 1129
POLYURETHANE COATINGS AND METHODS OF EXAMINATION OF THEIR PROPERTIES
Ziolkowska J., pages 1130 - 1133
MATHEMATICAL MODEL OF ENGINE VALVE MECHANISM
Zvolský T., pages 1134 - 1137
A DEVICE FOR AUTOMATIC ROBOT TOOL CENTER POINT (TCP) CALIBRATION ADJUSTMENT FOR THE ABB INDUSTRIAL ROBOTS
Zwierzchowski J., pages 1138 - 1141

Text and facts may be copied and used freely, but credit should be given to these Proceedings.

All papers were reviewed by members of the scientific committee. 






  

  

    

Publication Ethics - Ethical guidelines for publication




Webmaster contact: admin@it.cas.cz






imce
  Powered by
Imce 3.20  © 2023, Pavel Formánek, Institute of Thermomechanics AS CR, v.v.i. [generated: 0.0311s]