Engineering Mechanics

International Conference

Proceedings Vol. 10 (2004)

ENGINEERING MECHANICS 2004

NATIONAL CONFERENCE WITH INTERNATIONAL PARTICIPATION
May 10 – 13, 2004, Svratka, Czech Republic
Editors: Igor Zolotarev and Alena Poživilová

Copyright © 2004 Institute of Thermomechanics, Academy of Sciences of the Czech Republic, Prague

ISBN 80-85918-88-9 (printed)
ISSN 1805-8248 (printed)
ISSN 1805-8256 (electronic)

scientific commitee

keynote lectures

Vibration of bridges under high speed trains
Frýba L., pages 23 - +9p.
Flow control using synthetic jet actuators
Uruba V., pages 25 - +21p.

papers

Adjustment of the equilibrium position of the semiactively controlled suspension of the ambulance-couch
Alimov D., Petřík J., Šklíba J., pages 29 - +8p.
Proposal of electronically controlled moment screwdriver for drawing screws into bone tissue
Axman P., Florian Z., pages 31 - +4p.
Optimisation of the parameters at the passage of the rotor through critical speed by means of proper tuning
Ballo I., Chmúrny R., pages 33 - +6p.
Analysis of a crack growing through an interface of two different materials based on crack tip opening displacement
Bareš P., Knésl Z., pages 35 - +8p.
Description of state behavior along the critical isotherm and along the saturation curve using simple equations of state. Part III
Bayer Z., pages 37 - +8p.
Automatic analyses and recognition of moving objects in the picture by method of phase correlation, Full text,
Berjak J., Ondrůšek Č., Druckmüller M., pages 39 - +4p.
Artificial neural network application to walk of a four legged robot
Bezdíček M., Grepl R., Švehlák M., Chmelíček J., pages 41 - +8p.
Application of thermo-anemometer at physical modelling of pollutant diffusion in atmospheric boundary layer
Bezpalcová K., Jaňour Z., Jonáš P., Mazur O., Uruba V., pages 43 - +10p.
Dynamic effects analysis of tire models simulations
Blekta J., Mevald J., pages 45 - +5p.
Experimental investigation on basic mechanical properties of the sandstone masonry
Bouška P., Vokáč M., Záruba J., Štemberk P., pages 47 - +6p.
Strain localization in structures under bending
Brdečko L., pages 49 - +5p.
Developing damage models for concrete
Brož P., Novotný R., pages 51 - +9p.
Use of continuous action reinforcement learning automata for asynchronous electromotor control
Březina T., Turek M., pages 53 - +9p.
The optimization of dynamic properties of ball screw feed drives
Bubák A., Souček P., pages 55 - +10p.
Identification forces in contact wheel–rail
Culek B., Culek B. ml., Podruh J., Kolář M., pages 57 - +5p.
Uniaxial tension test of human skin in vivo, numerical model of skin and finite element modeling of human skin wounds closure
Čapek L., Hruš T., pages 59 - +8p.
The problem of the excitation functions generation for the model of the special positional servomechanism of the rangefinder
Čech V., Jevický J., pages 61 - +10p.
Forward damage detection method via genetic algorithms
Čižmár K., Starek L., pages 63 - +10p.
Computer solving of spine deformation
Čulík J., Mařík I., pages 65 - +8p.
On the choice of an adequate phenomenological model for viscoplastic fluids
David J., Filip P., pages 67 - +6p.
Finite element modeling of male vocal tract acoustics considering cleft palate
Dedouch K., Horáček J., Vampola T., Vokřál J., pages 69 - +8p.
Particularized modelling of operating loads of advanced straigh teeth in spur gear mesh
Doležal Z., Široká V., pages 71 - +11p.
Numerical simulation of the human cochlea
Dušek D., Pellant K., pages 73 - +6p.
Objective time derivative defined as covariant derivative
Fiala Z., pages 75 - +10p.
Identification of cause for seizing the tool shifting table on a Closed - Die Forging Press
Ficek F., Kadlec J., pages 77 - +5p.
Interpretation of effective value of non-stationary building vibration
Fischer C., Pospíšil S., pages 79 - +10p.
The computer aided field modelling of multiple disc cutting grinders
Flizikowski J., Flizikowski A., Peszyński K., pages 81 - +7p.
The cutting velocity model of multiple disc milling
Flizikowski J., Peszyński K., Tomporowski A., pages 83 - +6p.
The problems of effective coeffcient of static friction at friction surfaces of joint replacement
Franta L., Pražák J., pages 85 - +6p.
Frequency analysis of free vibrations of the beam in postcritical state
Frantík P., pages 87 - +6p.
Constrained identification of constants in polynomial models of hyperelastic materials
Fridrich F., pages 89 - +8p.
Response of a harmonically excited component fixed to a rubber mount – influence of the rubber mount properties random variability
Fridrich F., Menčík J., pages 91 - +7p.
Complex solutions of material tests
Frydrýšek K., Fuxa J., Fusek M., pages 93 - +8p.
Failure probability of the ceramic component with measured shape deflection of the contact cones for the random position against the counterpart
Fuis V., pages 95 - +10p.
Fatigue strength criterion fit for proportional loaded material
Fuxa J., Kubala R., Frydrýšek K., Fojtík F., Fusek M., Halama R., Rojíček R., pages 97 - +10p.
Use of complex dynamic models in design and control of walking robots
Grepl R., Ondrůšek Č., Kratochvíl C., pages 99 - +10p.
Control of experimental walking robot using simulating model
Grepl R., Věchet S., Bezdíček M., Švehlák M., Chmelíček J., pages 101 - +8p.
Hydraulic shock absorbers modelling in trolleybus multibody simulations of running over a large road unevenness
Hajžman M., Polach P., pages 103 - +10p.
Computing technique in contact fatigue
Halama R., Lenert J., pages 105 - +10p.
Contact of cylindrical surfaces with elastic incompressible coatings
Hlaváček M., pages 107 - +10p.
Experimental acoustic modal analysis of a male vocal tract model
Horáček J., Veselý J., Pešek L., Ružička P., pages 109 - +7p.
To influence of gear backlash and damping in tooth space on dynamics of nonlinear parametric systems with kinematic couplings
Hortel M., Škuderová A., pages 111 - +8p.
Experimental and numerical modelling of flow around the obstacles placed on a channel bottom
Hoření B., Chára Z., pages 113 - +12p.
Design of bearing from measured data
Houfek L., Hlavoň P., Houfek M., pages 115 - +4p.
Control of dynamic stability of moving the four-legged walking robot
Houška P., Singule V., Březina T., Ehrenberger Z., pages 117 - +8p.
Influence of nonproportional damping on free vibration of slender structures
Hračov S., pages 119 - +10p.
A thermodynamic model of supercooled water
Hrubý J., pages 121 - +10p.
Evolution of the mock-line of cardiovascular system circuit
Chlup H., Konvičková S., pages 123 - +5p.
Collision states detection for quadruped robot motion
Chmelíček J., Grepl R., Bezdíček M., Švehlák M., pages 125 - +6p.
Gears manufacturing and meshing – a didactic poster
Iwaszko J., pages 127 - +2p.
Design and computation the box of hydraulic scrap shear CNS 320 K
Jaitner A., pages 129 - +5p.
Optimalization of steam boiler pipe system
Jirouš F., pages 131 - +10p.
Use of X-ray computed tomography for construction of FE models of bones
Jiroušek O., Jírová J., Máca J., pages 133 - +8p.
Preliminary results on the mean flow characteristics of the wet steam downstream the LP stage of a 210MW turbine
Jonáš P., Mazur O., Řehák V., Uruba V., pages 135 - +7p.
Interaction of crack and aggregate in concrete
Keršner Z., Náhlík L., Knésl Z., pages 137 - +7p.
Stress singularity analysis of bodies with a bi-material notch
Klusák J., Knésl Z., pages 139 - +8p.
Risk analysis of high rise buildings
Kolisch M., Šejnoha J., pages 141 - +9p.
Stochastic simulation of creep crack growth in test specimens
Korouš J., Masák J., pages 143 - +6p.
Peculiarities of the limit state design theory in geotechnics
Koudelka P., pages 145 - +7p.
Numerical solution of lateral earth pressures – elastic-plastic solution using FEM and solution using GLPT theory
Koudelka T., Kuklík P., Koudelka P., pages 147 - +8p.
Approximate computations of pseudospectra
Kozánek J., pages 149 - +10p.
Numerical modeling of turbulent flow through a turbine cascade
Kozel K., Louda P., Příhoda J., pages 151 - +9p.
Modelling of electromechanical drive system failures
Kratochvíl C., Grepl R., pages 153 - +2p.
The decade of the national conference Engineering Mechanics
Kratochvíl C., Laryš F., pages 155 - +4p.
Mobile robot motion control by means of fuzzy rules
Krček P., Dvořák J., pages 157 - +10p.
Approximation of walking robot stability model
Krejsa J., Grepl R., Věchet S., pages 159 - +8p.
Domain decomposition method with sparse direct solver
Kruis J., Vondráček R., Bittnar Z., pages 161 - +9p.
Response of thin cylindrical water filled tank to the impact of pipe element
Křiváková J., pages 163 - +4p.
Dynamic action at electric locomotion drive system at rise of slip of wheelset
Lata M., pages 165 - +8p.
Constitutive model of vascular smooth muscle cells determined using computational simulation
Lebiš R., Burša J., Hayashi K., pages 167 - +7p.
Experimental evaluation of drag rotation coeffcient of the spherical particle
Lukerchenko N., Kvurt Yu., Chára Z., Vlasák P., pages 169 - +9p.
Life exhaustion assessment of pressure vessel of the reactor WWER 1000
Macák P., Pechmannová E., pages 171 - +10p.
The research of residual stress reductions at products
Macura P., Fiala A., pages 173 - +6p.
Dynamic response of building from groundborne vibration loading
Makovička D., Makovička D., pages 175 - +10p.
Determination of Q-function optimum grid applied on asynchronous electric motor control task
Marada T., Březina T., Singule V., pages 177 - +7p.
Analysis of seismic resistance of nuclear reactors WWER 440/V230 internals
Markov P., pages 179 - +10p.
Shock wave in two-phase fluid
Maxa J., Horák V., pages 181 - +8p.
Reconstruction of 3D model of the first cervical vertebra
Medůna O., Čapek L., Hruš T., pages 183 - +4p.
Reliability analysis and optimisation of components with random input variables
Menčík J., Fridrich F., pages 185 - +8p.
Modeling of response of viscoelastic materials to harmonic loading
Menčík J., Rauchs G., Belouettar S., Bardon J., Riche A., pages 187 - +7p.
Application the ”impact-echo” method to the concrete structure diagnostic in NPP building
Morávka Š., Voldřich J., pages 189 - +12p.
Application of hot-wire anemometry in a wind tunnel modelling of gaseous pollutants spreading
Moryń-Kucharczyk E., Jonáš P., Mazur O., Uruba V., pages 191 - +15p.
Simulation of control mechanism for change of the stitch density of knitted fabric
Mrázek P., pages 193 - +9p.
The effect of electric drive parameters on vibrations in machine aggregate
Mudrik J., pages 195 - +5p.
The computational modeling of the dynamical properties of the Laval’s rotor with the squeeze film damper using the database of additional effects
Muller J., Malenovský E., Pochylý F., pages 197 - +8p.
Iterative model correction based on transfer function
Musil M., pages 199 - +6p.
Influence of the pre-stressed areas on circular disc vibrations
Naď M., pages 201 - +8p.
Large deformation analysis of inflated air-spring shell by the finite element method
Nam T. H., Marvalová B., pages 203 - +10p.
Relations between frequency equations of beams
Nánási T., pages 205 - +4p.
Probability density assessment of a linear system due to polynomial of the normal noise
Náprstek J., pages 207 - +10p.
Thermal aspects of friction in joint replacements
Němeček R., Pražák J., pages 209 - +4p.
Analysis of dynamic stress of planetary transmissions
Neumann V., pages 211 - +6p.
Two scale modeling of masonry
Novák J., Šejnoha J., pages 213 - +10p.
Specimen preparation for microscopic image analysis of engineered cementious composites
Novák L., pages 215 - +6p.
Determination of limit pressure of pipeline with defect by energetic criterion
Novotný C., Španiel M., pages 217 - +5p.
Modelling of structures with moving loads
Novotný J., Novotný J. jun., pages 219 - +10p.
Floating system in the machine tools drives
Novotný L., pages 221 - +6p.
Anisotropic models of helical type for thin-walled circural cylindrical shells in membrane condition
Novotný R., Brož P., pages 223 - +10p.
The problematics of acoustic power determination of flat sources in straitened areas
Ondrouch J., Kaňák J., pages 225 - +6p.
Ionic concentration changes in the tubular system of rat ventricular cardiac cell model
Pásek M., Christé G., Šimurda J., pages 227 - +9p.
Dynamic response of the Lagrange and Timoshenko beam on the moving load
Pečínka L., pages 229 - +9p.
Modeling of the influence of middle ear prosthesis on hearing
Pellant K., Dušek D., Mejzlík J., pages 231 - +4p.
Thermomechanical processes in compliant damping elements
Pešek L., Půst L., Vaněk F., pages 233 - +9p.
Computational simulation of cold forming of bolts and prediction of material damage during the process
Petruška J., Skalka P., Janíček L., Rusz R., pages 235 - +8p.
Contact static analyse of wheel and rail by FEM
Podruh J., Culek B., pages 237 - +8p.
Design and optimization of external plastic panels of vehicles
Potěšil A., Cvejn J., pages 239 - +9p.
Modelling of the torsion and combined elongation–torsion tests of hyperelastic cylinders
Poživilová A., Plešek J., pages 241 - +10p.
The straight path stability of an array of collinear micro-cracks interacting with an array of circular inclusions
Profant T., Kotoul M., pages 243 - +10p.
Isostatic presses as an equipment for omnidirectional pressing process
Prokeš M., pages 245 - +11p.
Computational simulation of forced oscillation of the vocal folds in 3D space
Přikryl K., Mišun V., pages 249 - +4p.
Assessment of experiment reproducibility by finite element analysis
Pták S., Okrouhlík M., Trnka J., pages 251 - +12p.
SBRA method vs. Eurocode-reliability assessment of a steel structure
Pustka D., Marek P., pages 253 - +9p.
Static analysis of long and short journal bearings
Rak V., Malenovský E., Pochylý F., pages 255 - +10p.
Wind tunnel testing of stationary and nonstationary aerodynamic characteristics of the airfoil
Rozehnal D., pages 257 - +7p.
Stress-strain analysis of surgical connection between two aortic parts with different geometry
Ryšavý P., Burša J., Lebiš R., pages 259 - +8p.
Impacts computer simulation using LS-DYNA program
Salajka V., Kanický V., pages 261 - +7p.
The influence of DLC surface coat on abrasion of UHMWPE
Sedláček R., Rosenkrancová J., pages 263 - +6p.
Analysis and compensation thermal errors of machine tools
Soldát J., pages 265 - +9p.
Cutting quality improvement on cross cutting shears
Straka J., Ficek F., pages 267 - +7p.
Fatigue strength and life of real structures under combined random loading
Svoboda J., Balda M., Fröhlich V., pages 269 - +10p.
VUTBOT 2 mobile robot undercarriage kinematics and submodules of its multiprocessor control system
Szabó Š., Knoflíček R., pages 271 - +9p.
Robot navigation using Voronoi diagrams
Šeda M., pages 273 - +6p.
Some specific features of the rotor dynamic behaviour
Šimek J., pages 275 - +8p.
About the dependence of the natural frequencies of a vibroisolation system on the load magnitude and position
Šklíba J., Prokop J., Barbora J., pages 277 - +8p.
Computational and experimental modelling of the backbone element with applied fixator
Šlechtová M., Kočiš J., Florian Z., Návrat T., pages 279 - +8p.
Dynamic bridge response for truck with controlled suspensions
Šmilauer V., Máca J., Valášek M., pages 281 - +8p.
Thermal loading of stationary engine cylinder head
Španiel M., Diviš M., Tichánek R., pages 283 - +6p.
Heat transfer with fuzzy coeffcients
Štemberk P., Kruis J., pages 285 - +7p.
Mathematical model of the T-part for unsteady uncompressible fluid flow, the equivalent length setting
Štigler J., pages 287 - +9p.
Flow parameters measurement in the channel with the negative step
Šulc J., Lichtneger P., Zubík P., pages 289 - +10p.
Statistical and sensitivity analysis of determination of SEA coupling loss factors using a dual modal formulation
Švancara P., pages 291 - +10p.
Design of small laboratory quadruped robot
Švehlák M., Grepl R., Věchet S., Bezdíček M., Chmelíček J., pages 293 - +8p.
New possibilities of labyrinth seals steam flow limitation
Tajč L., Rudas B., pages 295 - +6p.
Visualization and numerical study of confined coaxial jets
Trávníček Z., Hrubý J., Vogel J., pages 297 - +10p.
Envelope of modulated harmonic components extraction from noise and vibration signals
Tůma J., pages 299 - +10p.
Occurrence of big droplets in the vicinity of the last stage of a 210MW steam turbine
Uruba V., Jonáš P., Mazur O., Řehák V., pages 301 - +7p.
Numerical implementation of the Leonov model
Valenta R., pages 303 - +11p.
Experimental-numerical evaluation of the surface plastic strain evolution
Vavřík D., Jakůbek J., pages 305 - +8p.
Continuous Q-learning application
Věchet S., Krejsa J., Miček P., pages 307 - +6p.
Analysis of the compressible viscous fluid flow through the gap caused by the incorrect contact of screw surfaces
Vimmr J., Švígler J., pages 309 - +10p.
Original theory of the residual stress identification using the hole-drilling method
Vítek K., Doubrava K., Holý S., Kolman R., Mareš T., Španiel M., pages 311 - +7p.
Application of nonlinear data reconciliation method for steam generators data
Vítek T., Havlena V., pages 313 - +8p.
Computational and experimental modeling of synchronous generator fan
Vlach R., Ondrůušek Č., pages 315 - +11p.
Cooling of synchronous machine winding using heat pipe
Vlach R., Ondrůušek Č., pages 317 - +7p.
Conveying of coarse particle in non-Newtonian slurry
Vlasák P., Chára Z., Konfršt J., pages 319 - +9p.
Scull vibrations and own voice perception
Vokřál J., Horáček J., Černý L., Veselý J., pages 321 - +8p.
Effect of surface layers on the propensity of disk brakes to frictionally excited thermoelastic instability during extreme braking
Voldřich J., Morávka Š., pages 323 - +8p.
Investigation of influence of assymetry in the case of vibration of resiliently supported and coupled three rigid plates application on the vehicle vibrations I
Volek J., Soukup J., Skočilasová B., pages 325 - +9p.
Transversale impact of elastic rod on thin elastic orthotropic rectangular plate II (Flügge’s and Timoshenko-Mindlin’s models)
Volek J., Soukup J., Šimsová J., pages 327 - +7p.
FEM computation of stress intensity factor for the chevron notch specimen under 3-point bending
Vysloužil T., Kotoul M., pages 329 - +7p.
Hybrid architectures of mobile robots
Vyšín M., pages 331 - +7p.
Buckling and wrinkling of compressed sandwich beams
Wierer M., pages 333 - +10p.
Incorporation of a vapour cavitation in short lemon hydrodynamical bearings with deep a central groove into computational models of rotor systems - response on unbalance excitation
Zapoměl J., pages 335 - +10p.
Exploitation of laser levelling device for estimation of bridges deflection
Záruba J., Štemberk P., Bouška P., Vokáč M., pages 337 - +6p.
Methodology of the gear transmission optimization from the constant gear mesh point of view
Zeman V., Hajžman M., Byrtus M., pages 339 - +9p.
About stability an aeroelastic system
Zolotarev I., pages 341 - +9p.
Flow parameters measurement in the curved diffuser of the rectangular cross-section
Zubík P., Šulc J., pages 343 - +9p.

Text and facts may be copied and used freely, but credit should be given to these Proceedings.

All papers were reviewed by members of the scientific committee. 






  

  

    

Publication Ethics - Ethical guidelines for publication




Webmaster contact: admin@it.cas.cz






imce
  Powered by
Imce 3.20  © 2023, Pavel Formánek, Institute of Thermomechanics AS CR, v.v.i. [generated: 0.0309s]