Engineering Mechanics

Proceedings Vol. 18 (2012)

ENGINEERING MECHANICS 2012

18th INTERNATIONAL CONFERENCE
May 14 – 17, 2012, Svratka, Czech Republic

Editors: Jiří Náprstek and Cyril Fischer

ISBN 978-80-86246-39-0 (printed, Extended Abstracts)
ISBN 978-80-86246-40-6 (electronic)
ISSN 1805-8248 (printed)
ISSN 1805-8256 (electronic)

scientific commitee

papers

Application of chaotic dynamics in natural and technical sciences

C. Kratochvíl, P. Švéda, M. Hortel, A. Škuderová, M. Houfek, pages 3 - 4

Two-scale modelling of strongly heterogeneous continua using the homogenization approach

E. Rohan, R. Cimrman, V. Lukeš, pages 5 - 21

Comparison of two possible approaches to inverse Laplace transform applied to wave problems

V. Adámek, F. Valeš, J. Červ, pages 25 - 32

The boundary between linearity and nonlinearity of the dynamics of gear drives

O. Ahmedov, V. Zeman, M. Byrtus, pages 33 - 34

Transmissibility of suspended seat loaded with passive mass and with human driver – discussion

M. Apetaur, B. Janeček, J. Šklíba, pages 35 - 46

The study of polymeric hollow fiber heat exchangers

I. Astrouski, M. Raudenský, pages 47 - 57

Motion capturing control for parallel kinematics robot

J. Augste, T. Novotný, pages 59 - 60

Structures with "ugli" imperfections

I. Baláž, Y. Koleková, pages 61 - 86

Natural ashlars of historical monument – modern methods of data processing and storage

M. Bednarik, K. Kovářová, R. Holzer, M. Laho, pages 87 - 95

Flow visualization in control valve with profiling cone

L. Bednář, L. Tajč, M. Miczan, L. A. Feldberg, pages 97 - 101

Effect of patch repair on fatigue behavior

M. Benachour, N. Benachour, F. Z. Seriari, M. Benguediab, pages 103 - 108

Short-span railway composite bridges: test and rating

J. Benčat, pages 109 - 116

Input shaping control of electronic cams

P. Beneš, M. Valášek, O. Marek, pages 117 - 122

Implementation of direct numerical simulation of viscous incompressible flow

M. Beňo, B. Patzák, pages 123 - 128

The inverse kinematics of n-serial robotic chain in different quadrants of working space

Z. Bobovský, F. Trebuňa, pages 129 - 135

Complex model of the lower urinary tract

M. Brandner, J. Egermaier, H. Kopincová, J. Rosenberg, pages 137 - 145

Singular cases of planar and spatial parallel manipulator

L. Brezina, L. Houfek, pages 147 - 150

Flow based vibrations of sluice gates – physical and numerical modelling

M. Brouček, V. Jirsak, M. Králík, P. Nowak, L. Satrapa, M. Zukal, pages 151 - 158

On effective implementation of the non-penetration condition for non-matching grids preserving scalability of FETI based algorithms

T. Brzobohatý, O. Vlach, Z. Dostál, pages 159 - 160

Hierarchical multiscale modelling of porous media with applications in biomechanics

R. Cimrman, E. Rohan, pages 161 - 168

Aeroelastic certification of light sport aircraft according "LTF" regulation

J. Čečrdle, V. Hlavatý, pages 169 - 176

Experimental device for testing of servomechanisms of the passive optoelectronic rangefinder

V. Čech, M. Červenka, P. Snopek, I. Trávníček, V. Václavík, pages 177 - 186

The secular equation for surface waves in 2D anisotropic elastodynamics

J. Červ, J. Plešek, pages 187 - 190

Computational study of sludge pump design with vortex impeller

M. Červinka, pages 191 - 201

Scalable algorithm for non-linear problems of solid mechanics

J. Dobiáš, S. Pták, Z. Dostál, T. Kozubek, A. Markopoulos, pages 203 - 210

Lattice modeling of concrete fracture including the effect of material spatial randomness

J. Eliáš, M. Vořechovský, pages 211 - 222

Time-discrete integration of finite deformation

Z. Fiala, pages 223 - 230

Comparison of composite material degradation assesment methods using acoustic analysis and laser vibrometry

T. Fíla, S. Urushadze, D. Kytýř, J. Valach, M. Šperl, pages 231 - 237

Design and use of novel compression device for microtomography under applied load

T. Fíla, P. Zlámal, P. Koudelka, O. Jiroušek, T. Doktor, D. Kytýř, pages 239 - 244

Discrete topology optimization of planar Cable-Truss structures based on genetic algorithms

V. C. Finotto, M. Valášek, pages 245 - 254

Resonance behaviour of spherical pendulum – influence of damping

C. Fischer, J. Náprstek, S. Pospíšil, pages 255 - 261

Force-torque control methods for industrial robots

L. Flekal, T. Kubela, A. Pochylý, V. Singule, pages 263 - 268

Blast performance of FRC composites

M. Foglar, M. Kovář, pages 269 - 279

Optimization of concentrating structures for river regulation with the use of CFD

P. Fošumpaur, pages 281 - 286

Characteristic of damage to the structural element by creating its “degradation profile”

J. Frankl, pages 287 - 290

Changes in physical properties of wood damaged by activities of wood-damaging fungi

J. Frankl, pages 291 - 294

Analysis of deflection of reinforced concrete elements after demoulding

M. Frantová, P. Štemberk, pages 295 - 299

New designs of external fixators for treatment in traumatology

K. Frydrýšek, O. Učeň, T. Kubín, L. Pleva, L. Žilka, V. Sládeček, pages 301 - 308

Numerical simulation of transitional flows with laminar kinetic energy

J. Fürst, pages 309 - 315

Finite element contact-impact algorithm in explicit transient analysis

D. Gabriel, J. Kopačka, J. Plešek, M. Ulbin, pages 317 - 321

Determination of burst pressure of thin-walled pressure vessels

Ľ. Gajdoš, M. Šperl, pages 323 - 333

An enhanced numerical solution of Blasius equation by means of the method of differential quadrature

A. Guran, J. Gwinner, pages 335 - 342

Non-linear finite element analysis of circular reinforced concrete columns retrofitted by steel jackets

A. Guran, M. Zakariaey, pages 343 - 344

Numerical simulation of two-phase flowin a low pressure steam turbine stage

J. Halama, J. Fořt, pages 345 - 353

Testing of mechanical properties of natural stones used as a building material

H. Hasníková, pages 355 - 361

Optimal semi-active preview control of a quarter car model with magnetorheological damper with respect to tire lift off

F. Havelka, M. Musil, pages 363 - 375

Computationally efficient algorithms for evaluation of statistical descriptors

J. Havelka, A. Kučerová, J. Sýkora, pages 377 - 381

Evaluation of wedge-splitting test results from quasi-brittle prismatic specimens using the double-K fracture model

I. Havlíková, T. Pail, V. Veselý, D. Vořechovská, Z. Keršner, pages 383 - 389

Fracture properties of cementitious composites reinforced with carbon nanofibers/nanotubes

P. Hlaváček, V. Šmilauer, pages 391 - 397

FEM simulation of an integrated longitudinal and tangential wave probe

P. Hora, O. Červená, pages 399 - 402

Experimental investigation of air pressure and acoustic characteristics of human voice. Part 1: measurement in vivo

J. Horáček, V. Radolf, V. Bula, J. Veselý, A. M. Laukkanen, pages 403 - 417

Comparison of implicit-gradient damage-plastic models

M. Horák, M. Jirásek, pages 419 - 426

The study of mechanics of deformation behaviour of service robots gripping systems

M. Horák, F. Novotný, pages 427 - 432

Applicability of existing indexes of non-proportionality of damping in case of theoretical model of slender structure with installed TMD

S. Hračov, S. Pospíšil, J. Náprstek, pages 433 - 448

Utilization of instant reality software for motion visualization

J. Hrbáček, T. Novotný, pages 449 - 451

Expansion limit estimation of pistol hollow point bullet penetrating the block of substitute material

J. Hub, J. Komenda, M. Novák, pages 453 - 460

Sensitivity analysis of small punch test

J. Hůlka, P. Kubík, J. Petruška, pages 461 - 468

The determination of the kinematic quantities by using the high-speed DIC method

R. Huňady, M. Hagara, M. Schrotter, pages 469 - 475

Software prediction of non-stationary heating of shell moulds for manufacture of artificial leathers

M. Hušek, A. Potěšil, pages 477 - 482

DES simulation of separation control for flow over hump

T. Hyhlík, M. Matějka, V. Skála, pages 483 - 487

Numerical analysis of thermal fields in the insulated cover of tire curing presses

M. Hynek, P. Votapek, pages 489 - 498

Influence of water temperature on heat transfer coefficient in spray cooling of steel surfaces

M. Chabičovský, M. Raudenský, M. Hnízdil, pages 499 - 505

Simulation of vehicle track dynamic loading

M. Chalupa, R. Vlach, pages 507 - 512

Motion of rotating spherical particles touching a wall

Z. Chára, P. Vlasák, I. Keita, pages 513 - 521

Numerical simulation and experiment swith the profile NACA 0012

Š. Chládek, I. Zolotarev, V. Uruba, pages 523 - 529

Fatigue crack growth and delamination in fiber metal laminate (glare) during loading with positive mean stress

A. Chlupová, V. Kozák, pages 531 - 536

Experimental measurement of full-field strains in the vicinity of U-notch in ductile material

I. Jandejsek, O. Jiroušek, D. Vavřík, pages 537 - 541

Large-scale micro-finite element simulation of compressive behavior of trabecular bone microstructure

O. Jiroušek, P. Zlámal, pages 543 - 549

Measurement of strains in concrete by interferometric fibre optic sensors

D. Jiroutová, M. Vokáč, P. Bouška, pages 551 - 555

Numerical analysis of a bridge pier subjected to truck impact

P. Jiříček, M. Foglar, pages 557 - 568

Simulation of pitting formation in gearing

J. Jurenka, M. Španiel, pages 569 - 578

Material non-linear beam element with shear capacity

J. Kabeláč, pages 579 - 584

Simulation of the behaviour of a 3D link of a knitted fabric made of Ni-Ti to the mechanical loading

J. Kafka, pages 585 - 592

Symbolic analysis of a mechatronic drive using the program SAMD

J. Kalous, D. Biolek, Z. Kolka, pages 593 - 606

Simulation of flight control of a hummingbird like robot near hover

M. Karásek, A. Preumont, pages 607 - 619

Comparative acoustic analysis of plane double-wall and multilayered sandwich baffles

S. Karczmarzyk, pages 621 - 624

Dependence of saltation parameters on bed roughness and bed porosity

I. S. Kharlamova, P. Vlasák, pages 625 - 629

Modeling of fresh concrete flow using XFEM

F. Kolařík, B. Patzák, pages 631 - 637

LTB resistance of beams influenced by plastic reserve or local buckling

Y. Koleková, I. Baláž, pages 639 - 655

B-spline finite element method in one-dimensional elastic wave propagation problems

R. Kolman, J. Plešek, M. Okrouhlík, pages 657 - 663

Frictionless contact of elastic bodies: comparison of treatment in finite element analysis and isogeometric analysis

J. Kopačka, R. Kolman, D. Gabriel, J. Plešek, pages 665 - 671

Numerical modelling of the reinforcement corrosion

P. Koteš, M. Brodňan, pages 673 - 679

Partial safety factors for evaluation of existing bridges according to Eurocodes

P. Koteš, J. Vičan, pages 681 - 690

Comparative study on numerical and analytical assessment of elastic properties of metal foams

P. Koudelka, O. Jiroušek, T. Doktor, P. Zlámal, T. Fíla, pages 691 - 701

Experiment E6/0,2 with lateral passive pressure rotation about the toe

P. Koudelka, J. Valach, J. Bryscejn, pages 703 - 707

Crack analysis in magnetoelectroelastic solids

S. Krahulec, J. Sládek, V. Sládek, P. Staňák, pages 709 - 718

Modeling of macroscopic elastic properties of aluminium foam

V. Králík, J. Němeček, pages 719 - 724

The laminar flow solution in the plane by eigenmode expansion

H. Krausová, pages 725 - 732

Aplication of high-resolution X-ray radiography for monitoring the penetration depth of consolidants in natural building stones

F. Krejci, J. Jakubek, M. Slavikova, P. Kotlik, pages 733 - 739

Mobile robot tracking using image processing

J. Krejsa, S. Věchet, T. Ripel, pages 741 - 744

The probabilistic calculating of fatigue crack propagation using FCProbCalc program

M. Krejsa, pages 745 - 754

Modelling of the ceiling slab from the hollow core panels in ansys program

J. Kršík, J. Křiváková, pages 755 - 761

Numerical analysis of coupled heat and moisture transfer based on Künzel model

J. Kruis, J. Maděra, pages 763 - 774

Eigenvibration of road bridges: measurement and numerical analysis

J. Kruis, M. Polák,T. Koudelka{}, T. Plachý, pages 775 - 788

A numerical study of the bicycle helmet drop test

O. Krupička, M. Šudrich, J. Vyčichl, pages 789 - 792

Macro-mechanical properties of nanotextiles on PLGA base - tensile strength

V. Křelinová, P. Tesárek, I. Klicmanová, P. Ryparová, J. Mukařovský, pages 793 - 796

Sequential designs of experiments for sampling-based sensitivity analysis

A. Kučerová, E. Janouchová, pages 797 - 809

Numerical analysis of fractured femur with internal osteosynthesis

V. Kunášek, J. Jírová, pages 811 - 814

Influence of geometric parameters on the stiffness of traditional dovetail timber joint

J. Kunecký, R. Cacciotti, M. Kloiber, pages 815 - 824

Early defect detection of acetabular implants

D. Kytýř, O. Jiroušek, P. Zlámal, T. Doktor, I. Jandejsek, pages 825 - 834

Collision of a rotating spherical particle with flat wall in liquid

N. Lukerchenko, Yu. Kvurt, Z. Chára, P. Vlasák, pages 835 - 841

Computational homogenization of acoustic problem in perforated plates

V. Lukeš, E. Rohan, pages 843 - 848

The use of rubber vibro-base isolation to decrease structure dynamic response

D. Makovička, D. Makovička, pages 849 - 855

Applied method for design optimization of hydrostatic guideway on real machine tool

M. Mareš, E. Stach, T. Holkup, pages 857 - 868

Numerical simulation of 3D glass sagging process

I. Matoušek, M. Starý, pages 869 - 873

Reinforced elements of structures from the glued laminated timber with high performance lamella

L. Melzerová, pages 875 - 878

Dynamic behaviour of locomotive with axle-mounted traction motors

T. Michálek, J. Zelenka, pages 879 - 887

Compensation of irregular motion of a machine tool feed drive axis

J. Moravec, pages 889 - 892

Comparison of approaches to prevention of injuries, accidents and incidents between the Czech Republic and Russia

L. Mukhametzianova, L. Kotek, pages 893 - 899

Method for constrained designs of experiments in two dimensions

E. Myšáková, M. Lepš, pages 901 - 914

Generalized linear model with aero-elastic forces variable in frequency and time domains

J. Náprstek, S. Pospíšil, pages 915 - 926

Analysis of vulnerability of cultural heritage against floods

K. Nedvědová, V. Kostkanová, J. Frankl, R. Pergl, pages 927 - 931

Micromechanics-based models of cocciopesto mortars

V. Nežerka, M. Somr, J. Zeman, pages 933 - 944

The criterion of choosing the proper seeding particles

J. Novotný, L. Manoch, pages 945 - 954

Effect of linseed oil on the mechanical properties of lime mortars

C. P. Nunes, Z. Slížková, D. Křivánková, D. Frankeová, pages 955 - 967

Stress wave propagation in the Institute of Thermomechanics

M. Okrouhlík, pages 969 - 970

Creep size evolution of cement paste prepared from portland cement with content of fly ash

P. Padevět, P. Bittnar, pages 971 - 974

The development of the size of fracture energy of cement paste with fly ash in the time

P. Padevět, O. Zobal, pages 975 - 977

Vibrations of the slender rod induced by the turbulence in the coolant flow

L. Pečínka, M. Švrček, pages 979 - 982

Laboratory optical measurement of model blade vibration under rotation

L. Pešek, F. Vaněk, V. Bula, J. Cibulka, B. Tryzna, pages 983 - 988

Digital image processing of structure response

M. Petřík, P. Štemberk, pages 989 - 992

Development and modeling of a biomechatronic sensor effector boot device

A. Platonov, L. Ilieva-Mitutsova, I. Chavdarov, N. Serbenyuk, O. Trifonov, V. Yaroshevsky, pages 993 - 1000

Estimation of the critical time step for explicit integration

J. Plešek, R. Kolman, D. Gabriel, pages 1001 - 1010

Variants of Navier-Stokes equations

F. Pochylý, S. Fialová, H. Krausová, pages 1011 - 1016

Validation of the point-mass modelling approach for fibres in the inverted pendulum model

P. Polach, M. Hajžman, O. Tuček, pages 1017 - 1031

Analysis of measured and computed force effects in tractor’s three-point linkage during tillage

P. Porteš, F. Bauer, J. Čupera, pages 1033 - 1040

Lifetime prediction of wind loaded mast and towers with respect to lateral and longitudinal wind spectrum

S. Pospíšil, J. Lahodný, V. Janata, S. Urushadze, R. Král, S. Hračov, pages 1041 - 1048

Branch and bound method for global optima of size optimization benchmarks

A. Pospíšilová, M. Lepš, pages 1049 - 1059

Shape optimization by particle swarm algorithm utilizing isogeometric analysis

A. Pospíšilová, M. Lepš, D. Rypl, B. Patzák, pages 1061 - 1071

BEM shape optimization of a hole in composite for minimum lagrangian

P. Prochazka, pages 1073 - 1080

Modeling of fiber bridging in multiply-cracking mortar

M. Přinosil, P. Kabele, pages 1081 - 1085

Computer simulation of musical singer’s voice based on MRI and acoustic measurements

V. Radolf, A. Nissinen, A. M. Laukkanen, R. Havlík, J. Horáček, pages 1087 - 1102

Mechanical design of the active orthosis

T. Ripel, J. Krejsa, pages 1103 - 1107

Homogenized phononic plates and wave dispersion

E. Rohan, R. Cimrman, B. Miara, pages 1109 - 1117

Unsteady measurements of aerodynamic characteristics of the airfoil

D. Rozehnal, pages 1119 - 1122

Instability of the swirling flows with/without cavitation

P. Rudolf, F. Pochylý, L. Čermák, D. Štefan, pages 1123 - 1124

Identification of parameters for models of ductile damage

J. Růžička, M. Španiel, M. Moravec, A. Prantl, J. Džugan, J. Kuželka, pages 1125 - 1134

Study of computational efficiency of numerical quadrature schemes in the isogeometric analysis

D. Rypl, B. Patzák, pages 1135 - 1143

Local integral formulations for thin plate bending problems

L. Sátor, V. Sládek, J. Sládek, pages 1145 - 1156

On-line correction of robots path based on computer vision

S. Selingerova, T. Kubela, A. Pochyly, V. Singule, pages 1157 - 1160

Mass lumping methods for the semi-loof shell element

V. Sháněl, R. Kolman, J. Plešek, pages 1161 - 1171

Predicting self-compacting concrete shrinkage based on a modified fuzzy logic model

W. R. L. da Silva, P. Štemberk, pages 1173 - 1181

Influence of the synthetic jet on the flow around the hump

V. Skála, M. Matějka, pages 1183 - 1187

Methodology for determination of moisture distribution

J. Skramlik, M. Novotny, K. Suhajda, pages 1189 - 1193

On applications of distributions to analysis of circular plate design elements

J. Sobotka, pages 1195 - 1200

Assessment of fatigue of railway bridge

P. Stachová, P. Štemberk, pages 1201 - 1205

Bending of functionally graded circular plates with piezoelectric layer by the MLPG method

P. Staňák, J. Sládek, V. Sládek, S. Krahulec, pages 1207 - 1217

Use of electro-magnetic damping for vibration control

G. J. Stein, R. Darula, S. Sorokin, pages 1219 - 1228

Hydraulic design of inducer

J. Stejskal, pages 1229 - 1235

Open source FEM-DEM coupling

J. Stránský, M. Jirásek, pages 1237 - 1251

Modelling of ductile fracture for sub-sized three-point-bend geometry

L. Stratil, H. Hadraba, V. Kozák, I. Dlouhý, pages 1253 - 1258

Verification of rapid method for determining the S-N curve in limited life region

P. Strzelecki, J. Sempruch, pages 1259 - 1262

Assessment of model uncertainties in the analysis of reinforced concrete structures

M. Sýkora, V. Červenka, M. Holický, pages 1263 - 1272

Reliability assessment of industrial heritage buildings

M. Sýkora, M. Holický, pages 1273 - 1280

Prestressed concrete sleeper under extreme loading conditions

J. Sýkorová, J. Bártová, P. Štemberk, pages 1281 - 1286

Material parameters of cement and alkali activated fly ash concrete mixtures laboratory measurements and numerical simulation

M. Šejnoha, M. Brouček, E. Novotná, D. Lehký, P. Frantík, Z. Keršner, pages 1287 - 1292

Resistance of concrete with fly ash content under the RWS curve fire loading

M. Šejnoha, M. Brouček, E. Novotná, J. Sýkora, pages 1293 - 1300

Mixed-mode higher-order terms coefficients estimated using the over-deterministic method

L. Šestáková, pages 1301 - 1307

Modelling of fatigue failure of gears with thin rim

M. Ševčík, L. Náhlík, P. Hutař, M. Zouhar, B. Máša, pages 1309 - 1310

Application of dynamic relaxation method in analysis of cable membrane structures

K. Šobra, M. Hüttner, J. Máca, pages 1311 - 1317

Fatigue under fretting conditions

M. Španiel, M. Nesládek, J. Jurenka, J. Kuželka, J. Růžička, pages 1319 - 1329

Structure of flow fields downstream of two different swirl generators

D. Štefan, P. Rudolf, S. Muntean, R. F. Susan-Resiga, pages 1331 - 1342

Introduction of the analytical turbulent velocity profile between two parallel plates

J. Štigler, pages 1343 - 1352

Flow conditions in the last stage during idling operation and low output of 1000MW turbine

L. Tajč, L. Bednář, M. Hoznedl, pages 1353 - 1361

Limit states of concrete structures subjected to environmental actions

B. Teplý, D. Novák, pages 1363 - 1367

Turbulences in artificial boundary layer of fotovoltaic power plants

A. Tesár, pages 1369 - 1379

Enigma of submerged fence skin friction sensor

V. Tesař, pages 1381 - 1394

Trapped vortex ring

V. Tesař, pages 1395 - 1405

Low cycle fatigue and analysis of the cyclic stress-strain response in superalloy Inconel 738LC

J. Tobiáš, A. Chlupová, M. Petrenec, J. Polák, pages 1407 - 1411

Design of universal control unit for brushless dc motors

J. Toman, J. Hrbáček, V. Singule, pages 1413 - 1418

Relationship between fatigue life and structure of human trabecular bone

T. Topoliński, A. Mazurkiewicz, pages 1419 - 1423

Problems of producing test samples from callus dental

T. Topoliński, M. Wirwicki, pages 1425 - 1428

New approaches to assessment of stress and strain fields with application of PhotoStress method

F. Trebuňa, P. Frankovský, J. Jadlovský, pages 1429 - 1434

Determination of mechanical properties from microcompression test

M. Truhlář, T. Kruml, I. Kuběna, K. Petráčková, L. Náhlík, pages 1435 - 1440

Active vibration control of a cantilever beam

J. Tůma, pages 1441 - 1448

Investigations of orthotropic decks

S. Urushadze, L. Frýba, M. Pirner, pages 1449 - 1455

Experimental and numerical verification of vortex induced vibration of hangers on the footbridge

S. Urushadze, M. Pirner, S. Pospíšil, R. Král, pages 1457 - 1464

The methodology of fatigue test simplification

J. Vágner, B. Culek~jr., B. Culek, pages 1465 - 1471

Mondis: knowledge-based system of failure of historical constructions

J. Valach, R. Cacciotti, M. Čerňanský, P. Kuneš, pages 1473 - 1474

Influence of the geometric configurations of the human vocal tract on the voice production

T. Vampola, J. Horáček, pages 1475 - 1483

X-ray observation of the loaded silicate composite

D. Vavřík, T. Fíla, I. Jandejsek, V. Veselý, pages 1485 - 1491

Artificial ant colony method for state-space exploration

S. Věchet, J. Krejsa, J. Hrbáček, pages 1493 - 1496

Numerical prediction of parasitic energy dissipation in wedge splitting tests on concrete specimens

V. Veselý, T. Holušová, S. Seitl, pages 1497 - 1504

Non-Newtonian effects of pulsatile blood flow in a realistic bypass graft geometry

J. Vimmr, A. Jonášová, O. Bublík, pages 1505 - 1516

Sedimentation of dilute suspension in intermediate region

P. Vlasák, Z. Chára, pages 1517 - 1524

The self-excited vibration of the NACA0015 profile

V. Vlček, I. Zolotarev, J. Kozánek, pages 1525 - 1533

Wire glass in building construction

M. Vokáč, M. Špaček, M. Sýkora, P. Bouška, pages 1535 - 1542

Measuring of wheel–rail adhesion characteristics at a test stand

P. Voltr, M. Lata, O. Černý, pages 1543 - 1553

Numerical modelling of engineered cement-based composites

J. Vorel, W. P. Boshoff, pages 1555 - 1564

Cyclic loading of masonry walls and its anti seismic strengthening

M. Wünsche, S. Hračov, S. Pospíšil, S. Urushadze, pages 1565 - 1572

Experimental investigation of pedestrian level winds using multiple measuring methods

D. Zacho, P. Michálek, pages 1573 - 1579

Mathematical modelling of a damping element working on the principle of squeezing two layers of normal and magnetorheological oils arranged in series and its application for vibration attenuation of a rigid rotor

J. Zapoměl, P. Ferfecki, J. Kozánek, pages 1581 - 1588

Application of sensitivity analysis in design of characteristics of damping joints in locomotive running gear

J. Zelenka, M. Kohout, pages 1589 - 1595

Kinematical excited vibration of the nuclear fuel assembly

V. Zeman, Z. Hlaváč, pages 1597 - 1602

Long-term monitoring of mechanical damage on the historical structures

P. Zíma, pages 1603 - 1610

Indirect determination of material model parameters for single trabecula based on nanoindentation and three-point bending test

P. Zlámal, O. Jiroušek, D. Kytýř, T. Doktor, pages 1611 - 1620

Mechanical properties of cement paste with various content of fly ash after 6 months

O. Zobal, P. Padevět, pages 1621 - 1624

Energy sensitive X-ray imaging with pixel stack detector

J. Žemlicka, J. Jakubek, P. Soukup, pages 1625 - 1630

FEM simulation of high velocity shock waves in fiber reinforced composites

M. Žmindák, Z. Pelagič, pages 1631 - 1642

Text and facts may be copied and used freely, but credit should be given to these Proceedings.

All papers were reviewed by members of the scientific committee.

Engineering Mechanics

International Conference

Proceedings Vol. 18 (2012)

ENGINEERING MECHANICS 2012

papers