Engineering Mechanics

Proceedings Vol. 21 (2015)

ENGINEERING MECHANICS 2015

21st INTERNATIONAL CONFERENCE
May 11 – 14, 2015, Svratka, Czech Republic

Editors: Jiří Náprstek and Cyril Fischer

ISBN 978-80-86246-42-0 (printed, Extended Abstracts)
ISSN 1805-8248 (printed)
ISSN 1805-8256 (electronic)

scientific commitee

papers

Different Approaches to Parallelization of Vector Assembly

M. Bošanský, B. Patzák, pages -

Application of the DOProC Method in Solving Reliability Problems

M. Krejsa, P. Janas, V. Krejsa, pages 2 - 5

Solution of Large Engineering Problems on Parallel Computers

J. Kruis, pages 6 - 7

Model Based Design of Fuel Pump Control

O. Andrs, J. Vetiska, M. Holub, J. Kovar, pages 10 - 11

Safety Factors γ_M0 and γ_M1 in Metal Eurocodes

I. Baláž, Y. Koleková, pages 12 - 13

Bending, Torsion and Distortion of Thin-Walled Beams

I. Baláž, Y. Koleková, pages 14 - 15

Determination of Mechanical Properties of Magnesium Alloys and Composites by Small Punch Testing

D. Bártková, J. Langer, P. Dymáček, L. Válka, pages 16 - 17

Changes of Dynamic Properties of a Timber Frame Due to Simulated Seismic Load: A Case Study

J. Bayer, S. Pospíšil, S. Urushadze, B. Kasal, pages 18 - 19

Stone in Historical Architecture in Slovakia

M. Bednarik, R. Holzer, R. Tornyai, pages 20 - 21

Comparison of Hybrid Metal-Composite Micropin Joints with Conventional Ones in Terms of Fatigue Life

G. Beketova, M. Shevtsova, V. Symonov, pages 22 - 23

Full-Scale Testing of the Highway Arch Viaduct

J. Benčat, pages 24 - 25

Experimental and Numerical Analysis of Concrete Slender Columns by Stability Failure

V. Benko, Ľ. Fillo, P. Kendický, V. Dvoranová, pages 26 - 27

On Choice of Lagrange Multipliers for Fictitious Domain Method for the Numerical Simulation of Incompressible Viscous Flow around Rigid Bodies

M. Beňo, B. Patzák, pages 28 - 29

Fatigue Testing of Polymeric Hollow Fibre Heat Transfer Surfaces by Pulsating Pressure Loads

T. Brožová, T. Luks, I. Astrouski, M. Raudenský, pages 30 - 31

Modelling of Rotating Twisted Blades as 1D Continuum

J. Brůha, D. Rychecký, pages 32 - 33

Assessment of Cast-Iron Structures

I. Brych, M. Sýkora, pages 34 - 35

Comparison of Flutter Derivatives for Kao Pin Hsi Bridge and Flat Plate

A. Buljac, S. Pospíšil, H. Kozmar, pages 36 - 37

Influence of Vortex Excitation on the U-Tube Bundle

J. Buzík, T. Létal, pages 38 - 39

Simulation of the Motor Power of Line-of-Sight Stabilized Devices by Passing the Test Bump

V. Cech, J. Jevicky, M. Jus, pages 40 - 41

Simulation of Nonlinear Characteristic of Aileron Attachment on Aeroelastic Demonstrator Using Active Electromagnetic Spring Concept

J. Čečrdle, J. Maleček, V. Hlavatý, P. Malínek, pages 42 - 43

Experimental Studies of Heat Flow Through the Radiator of Electric Motor in a Multi-Purpose Hybrid Vehicle (WIPH)

W. Danek, R. Lawniczek, pages 44 - 45

Experimental Study of Heat Flow through the Cooling System of the Internal Combustion Engine in a Hybrid Vehicle WIPH

W. Danek, R. Lawniczek, pages 46 - 47

Advanced Computational Analysis of Connecting Rod of an Aircraft Engine

J. Dlugoš, P. Novotný, P. Raffai, pages 48 - 49

Wang Tilings in Numerical Homogenization

M. Doškář, J. Novák, pages 50 - 51

Validation Task for Solution of Optimal Slotted Flap Position Using FLUENT Software

P. Doupník, T. Koutník, pages 52 - 53

Dependence of the Discrete Model on the Internal Parameters Considering Grain Crushing

R. Dubina, J. Eliáš, pages 54 - 55

Bifurcations in Mathematical Model of Nonlinear Vibration of the Nuclear Fuel Rod

Š. Dyk, V. Zeman, pages 56 - 57

Adaptive Remeshing Technique in Discrete Models of Random Geometry

J. Eliáš, pages 58 - 59

Discontinuous Galerkin Simulation of Dynamic Elasticity and Application to Fluid-Structure Interaction

M. Feistauer, M. Hadrava, J. Horáček, A. Kosík, pages 60 - 61

Nonlinear Behaviour of Concrete Foundation Slab

J. Fiedler, T. Koudelka, pages 62 - 63

Punching Resistance of Flat Slabs

Ľ. Fillo, T. Augustín, J. Hanzel, V. Dvoranová, pages 64 - 65

Numerical Simulation of Flows through Labyrinth Seals

J. Fürst, pages 66 - 67

Fracture Toughness Testing for Improving the Safety of Gas Pipelines

Ľ. Gajdoš, M. Šperl, pages 68 - 69

Numerical and Experimental Study of Control Algorithm for Unloading System in Mechatronic Device for Gait Reeducation

G. Gembalczyk, pages 70 - 71

Resistance of Composite Steel-Concrete Columns with Solid Steel Profile

Š. Gramblička, J. Frólo, pages 72 - 73

Response of a Non-Linearly Damped Duffing Oscillator Including Non-Linear Restoring Force by Using a Variational Approach

A. Guran, pages 74 - 75

Simulation of Damage in Hybrid Composite Cell Structure

J. Had, M. Růžička, pages 76 - 77

Finite Element Modelling of the Effect of Stiffness and Damping of Vocal Folds Layers on their Vibrations and Produced Sound

P. Hájek, P. Švancara, J. Horáček, J. Švec, pages 78 - 79

Numerical Solution of Humid Air Flow with Non-Equilibrium Condensation

J. Halama, M. Vrátný, pages 80 - 81

Statistical Safety Evaluation of EC2 and MC 2010 – Model for Assessment of Punching Resistance of Footings

J. Hanzel, L. Majtanova, J. Halvonik, pages 82 - 83

Uncertainty Analysis of Earth Dam

J. Havelka, J. Sýkora, A. Kučerová, pages 84 - 85

Evaluation of Fracture Tests of Concrete Specimens via Advanced Tool for Experimental Data Processing

I. Havlikova, P. Frantik, J. Masek, J. Sobek, H. Simonova, V. Vesely, Z. Kersner, S. Seitl, I. Merta, A. Schneemayer, pages 86 - 87

CFD Analysis of the Coolant Flow in Fuel Assembly of the VVER1000 Type Reactor

V. Heidler, J. Vimmr, O. Bublík, pages 88 - 89

Engineering Properties of Alkali Activated Fly Ash Foams

P. Hlaváček, V. Šmilauer, J. Vorel, pages 90 - 91

Unsteady Flow Past a Circular Cylinder Using Advanced Turbulence Models

J. Holman, pages 92 - 93

Analysis of Machine Tool Spindles under Load

M. Holub, J. Vetiska, J. Knobloch, P. Minar, pages 94 - 95

Aero-Acoustic and Vibration Characteristics of Self-Oscillating Artificial Vocal Folds

J. Horáček, V. Bula, V. Radolf, T. Vampola, M. Dušková, pages 96 - 97

Performance of Fibre Reinforced Concrete Specimens Subjected to Impact Loading

A. Horska, P. Jiricek, M. Foglar, pages 98 - 99

To the Analytical Analysis of the Internal Dynamics of Nonlinear Time Heteronymous Planetary Differential Systems

M. Hortel, A. Škuderová, pages 100 - 101

Approximate Calculation of Eigen-Values of Linear Viscously Damped System with Passive Damping Element

S. Hračov, pages 102 - 103

Numerical Solution of Wet Steam Flow through Blade Stage

V. Hric, J. Halama, pages 104 - 105

Study of Surface Quality and Mechanical Properties of Composite Material Based on Natural Reinforcement

Z. Hutyrová, D. Mitaľ, M. Harničárová, J. Zajac, J. Valíček, pages 106 - 107

Void Fraction Based Two Phase Flow Model of Natural Draft Wet-Cooling Tower

T. Hyhlík, pages 108 - 109

Load Carrying Capacity of Steel Arch Reinforcement Taking Into Account the Geometrical and Physical Nonlinearity

P. Janas, L. Koubová, M. Krejsa, pages 110 - 111

Experimental Measurement of Elastic-Plastic Fracture Parameters Using Digital Image Correlation Method

I. Jandejsek, L. Gajdoš, M. Šperl, D. Vavřík, pages 112 - 113

Risk-Based Inspection of Some Components of Power Plant Prunéřov-II

J. Janošťák, J. Stoniš, Z. Ramík, pages 114 - 115

Properties of Commercially Available, Ready-to-Use Mortars for the Restoration of Historic Renders and Masonry

D. Janotová, K. Niedoba, P. Gláser, P. Šašek, R. Fabeš, pages 116 - 117

Parameter Identification of Heterogeneous Materials from a Set of Destructive Experiments

E. Janouchová, A. Kučerová, J. Sýkora, pages 118 - 119

Measuring of a Nose Landing Gear Load During Take-Off and Landing

I. Jebáček, M. Horák, pages 120 - 121

Aerodynamic Characteristics of Steam Turbine Prismatic Blade Section

T. Jelínek, P. Straka, M. Kladrubský, pages 122 - 123

Mechanical Properties of 3D Auxetic Structures Produced by Additive Manufacturing

O. Jiroušek, P. Koudelka, T. Fíla, pages 124 - 125

VVER-440 Steam Generator's Two-Phase Flow Analysis

L. Joch, R. Krautschneid, pages 126 - 127

Exprimental Modal Analysis of a Rectangular Plate with Embedded Piezoelectric Actuators and Sensors

M. Jovanović, A. Guran, A.M. Simonović, N.D. Zorić, N.S. Lukić, S.S. Ilić, pages 128 - 129

Preliminary Investigations of Machine Frame Vibration Damping Using Eddy Current Principle

G.J. Stein, P. Tobolka, R. Chmúrny, pages 130 - 131

The Influence of Autocorrelation Length of Random Strength Stochastic Discrete Simulations

J. Kaděrová, J. Eliáš, M. Vořechovský, pages 132 - 133

Calibration of Hypoplastic Models for Soils

T. Kadlíček, T. Janda, M. Šejnoha, pages 134 - 135

Detail Topometrical FEM Optimization of Wing Structural Panel

T. Katrňák, J. Juračka, pages 136 - 137

Multibody Based Tool for Simulation of the Turbocharger Rotor Dynamics

J. Knotek, P. Novotný, O. Maršálek, pages 138 - 139

Fresh Concrete Flow through Reinforcing Bars using Homogenization Approach

F. Kolařík, B. Patzák, J. Zeman, pages 140 - 141

Partitioned Equations of Motion for Wave Propagation Problems in Solids

R. Kolman, S. Cho, K. Park, pages 142 - 143

Deformation Mechanisms of Auxetic Microstructures for Energy Absorption Applications

P. Koudelka, M. Neuhäuserová, T. Fíla, D. Kytýř, pages 144 - 145

Experiment E7/0,3 – Time Behaviour of Active Pressure of Non-Cohesive Sand after Wall Translative Motion

P. Koudelka, pages 146 - 147

Modelling of Moisture Transport Influenced by Damage in Concrete Structures

T. Koudelka, J. Kruis, pages 148 - 149

Wing Geometry Design Using Glauert's Method

T. Koutník, pages 150 - 151

The Influence of Internal Structure Change on Sandstone Strength

K. Kovářová, pages 152 - 153

Implementation of k-kL-ω Turbulence Model for Compressible Flow into OPENFOAM

M. Kožíšek, J. Fürst, J. Příhoda, P. Doerffer, pages 154 - 155

Numerical Investigation of Wind Effects on the Perforated Structures

R. Král, S. Pospíšil, pages 156 - 157

Nonlinear Analysis of Fire Resistance of Composite Steel-Concrete Tube Colum

J. Kralik, A. Grmanova, M. Klabnik, pages 158 - 159

Probabilistic Nonlinear Analysis of Bubble Tower Structure due to Extreme Pressure and Temperature

J. Králik, J. Králik jr., pages 160 - 161

Probabilistic Assessment of Historic Reinforced Concrete Bridge

J. Krejsa, M. Sýkora, M. Drahorád, pages 162 - 163

Problems of Lamella Flanges in Steel Bridge Construction

V. Křístek, M. Škaloud, J. Kunrt, S. Urushadze, pages 164 - 165

Acoustic Metamaterial Behaviour of 3D Periodic Structures Assembled by Robocasting

A. Kruisová, H. Seiner, P. Sedlák, M. Landa, B. Román-Manso, P. Miranzo, M. Belmonte, pages 166 - 167

Effect of Pulsating Water Jet Peening on 316L Stainless Steel

T. Kruml, P. Hlaváček, J. Foldyna, J. Tobiáš, J. Man, pages 168 - 169

Decreasing of Sliding Friction in Hydraulic Piston Damper

M. Kubík, I. Mazůrek, O. Macháček, pages 170 - 171

Computational Model of ATV Vehicle for Real-Time Simulation

P. Kučera, V. Píštěk, pages 172 - 173

Prediction of Optimal Load and Performance of Thermal Batteries

M. Kušnerová, J. Valíček, M. Harničárová, pages 174 - 175

Analysis of the Boundary Problem with the Preference of Mass Flow

M. Kyncl, J. Pelant, pages 176 - 177

Deformation Behaviour of Gellan Gum Based Scaffold Subjected to Compression Loading

D. Kytyr, T. Doktor, M. Adorna, M. Neuhauserova, J. Sleichrt, N. Fenclova, A. Gantar, S. Novak, pages 178 - 179

Reliability of Approach Slabs and Modelling of Transition Zones of Bridge

K. Laco, V. Borzovič, pages 180 - 181

Utilization of Artificial Neural Network Based Response Surface Method for Reliability Analysis of Structures

D. Lehký, M. Šomodíková, pages 182 - 183

Consolidation Testing of Porous Limestone Using Lime Nanomaterials: Optimization, Assessment of Stone Mechanical and Structural Characteristics

D. Macounová, K. Bayer, M. Navrátilová, Z. Slížková, pages 184 - 185

Mechanics of Laser Cut Stent Grafts

Š. Major, V. Kocour, Š. Hubálovský, pages 186 - 187

The Influence of Deformation of the Frame of Testing Device on the Accuracy of Brazilian Test and Indirect Assessment of Young Modulus

Š. Major, D. Vavřík, V. Kocour, J. Bryscejn, pages 188 - 189

Failure of Window Glass Plate under Blast Load

D. Makovička, D. Makovička jr., pages 190 - 191

Numerical Solution of Micro-Lubrication in Internal Combustion Engine Journal Bearing

O. Maršálek, P. Novotný, J. Knotek, pages 192 - 193

Numerical Calculation of Coefficient of Force for Cylindrical Shape Smokestack Covered with Corrugated Iron

V. Michalcová, L. Lausová, pages 194 - 195

Experimental Study of Gas Dispersion over Complex Terrain

P. Michálek, D. Zacho, pages 196 - 197

Experimental Verification of the Unloaded Control Valve

M. Miczán, L. Bednář, M. Hoznedl, L. Tajč, pages 198 - 199

Quasicontinuum Approach Applied to Inelastic Materials

K. Mikeš, pages 200 - 201

Microindentation Assessment of Climatic Loading Impacts on Polymer Sealants

J. Minster, P. Šašek, pages 202 - 203

Influence of the Primary Breakup Conditions on the Droplet Size of the Spray Generated by Twin Fluid Atomizers

M. Mlkvik, M. Zaremba, P. Stähle, H.P. Schuchmann, V. Gaukel, J. Jedelsky, pages 204 - 205

Adaptive Updating of Meta-Models in Hyperspherical Domains

E. Myšáková, M. Lepš, pages 206 - 207

Non-Linear Normal Modes in Dynamics – Discrete Systems

J. Náprstek, C. Fischer, pages 208 - 209

Modification of Protective Lime Coating Systems for the Porous Limestone Using Lime Nanomaterials: Assessment of Mechanical Properties and Ageing Resistance

M. Navrátilová, K. Bayer, E. Ghaffari, D. Macounová, Z. Slížková, J. Weber, pages 210 - 211

Dynamic Analysis of Cables on Pulleys Using the New Algorithm

I. Němec, H. Štekbauer, pages 212 - 213

Issue of Rigidity of the Ball Screw Nut Exposed to Bending Stress during Bending Stress of the Ball Screw

L. Novotný, J. Marek, T. Marek, pages 214 - 215

Methodology of Geometry Testing and Measuring of Oversized Machine Tool Components and Their Verification Using the FEM Method

L. Novotný, O. Učeň, pages 216 - 217

Reduction of Pneumatic Tyred Roller Fuel Consumption

T. Panáček, M. Klapka, pages 218 - 219

Parallel Solver for Large Thermo-Elasto-Plastic Finite Element Problems

P. Pařík, pages 220 - 221

Development of Technology of Controlled Wave Effects on Low-Carbon Array

M. Pavlenko, pages 222 - 223

Acoustic Standing Waves in Primary Circuit of NPPs with WWER 1000 MW

L. Pečínka, M. Švrček, pages 224 - 225

Mars Probe Soft Landing Test in the Earth Conditions

J. Pejchar, M. Daniel, R. Popela, pages 226 - 227

Micromechanical Homogenization of Ultra-High Performance Concrete

V. Petráňová, T. Sajdlová, J. Němeček, pages 228 - 229

Stability of Stainless Steel Prestressed Stayed Columns

R. Pichal, J. Machacek, pages 230 - 231

Helical Reinforcements Can Be Replaced with Glass Reinforcements

L. Podolka, pages 232 - 233

Statistical Evaluation of Three and Four-Point Bending Tests of FRC

A. Podstawka, M. Foglar, V. Kristek, pages 234 - 235

Two Approaches to the Simulations of City Bus Driving Tests

P. Polach, J. Václavík, pages 236 - 237

Variation of Strouhal Number on Iced Cable in Sub-Transitional Range

S. Pospíšil, P. Górski, S. Kuznetsov, M. Tatara, A. Marušić, pages 238 - 239

Reconstruction of Random Media via Multi-Objective Optimization

A. Pospíšilová, M. Lepš, pages 240 - 241

Mechanical Properties of Fiber Reinforced Lime-Based Mortar Evaluated from Four-Point Bending Tes

M. Přinosil, P. Kabele, pages 242 - 243

Definition of Effective Material Properties of Recycled Plastic: Image Analysis and Homogenization

Z. Procházková, V. Králík, K. Doubrava, M. Šejnoha, pages 244 - 245

Dynamics of Simple Planet Gearing Model

L. Půst, L. Pešek, pages 246 - 247

Mathematical Modelling of the Sensitivity of Acoustic Resonance Properties to a Change in Volume of Lateral Cavities of the Human Vocal Tract

V. Radolf, pages 248 - 249

Measuring of Driving and Impact Dynamics of Cyclists

Z. Radová, L. Nouzovský, pages 250 - 251

Computer Simulation of the Behavior of the Piston Ring Pack of Internal Combustion Engines

P. Raffai, P. Novotný, J. Dlugoš, pages 252 - 253

Parallel Computing Procedure for Dynamic Relaxation Method on GPU Using NVIDIA's CUDA

V. Rek, I. Němec, pages 254 - 255

Modelling of the Influence of Vegetative Barrier on Concentration of PM10 and PM2,5 from Highway

H. Řezníček, L. Beneš, pages 256 - 257

The Dynamic Response of Polymeric Composites

R. Řídký, M. Popovič, S. Rolc, M. Drdlová, J. Krátký, pages 258 - 259

Ansys More than FEM

R. Řídký, L. Iván, M. Popovič, pages 260 - 261

Numerical Simulation of Flow in the Human Vocal Tract

V. Řidký, pages 262 - 263

Simple Model of the Cajal-Like Interstitial Cell and Its Analysis

J. Rosenberg, M. Štengl, M. Byrtus, pages 264 - 265

Long-Term Trends in Annual Ground Snow Maxima for the Carpathian Region

Á. Rózsás, M. Sýkora, L. Vigh, pages 266 - 267

Parallel Data Mapping between Simplex Finite Element Meshes using Mesh Topology

D. Rypl, J. Vesecký, pages 268 - 269

Dynamic Analysis of the Structure Exposed to the Moving Periodic Force and Viscoelastic Models of the Human Body

V. Šána, pages 270 - 271

Verification of Ductile Fracture Criteria Based on Selected Calibration Tests

F. Šebek, P. Kubík, J. Petruška, pages 272 - 273

Fatigue Crack Front Behavior near the Free Surface

M. Ševčík, P. Hutař, A. Kotousov, L. Náhlík, pages 274 - 275

Tangent Curve Mathematical Model for Illustration of Deformation Curve of Rapeseeds

R. Sigalingging, D. Herák, A. Kabutey, pages 276 - 277

Road Dust Emission Modelling

V. Šíp, L. Beneš, pages 278 - 279

The “Miracle” of Post-Buckled Behaviour in Thin-Walled Steel Construction and its Breathing-Induced Limitation

M. Škaloud, M. Zörnerová, S. Urushadze, pages 280 - 281

Strengthening of Weak Historic Renders with Traditional and Innovated Consolidation Treatment

Z. Slížková, D. Frankeová, pages 282 - 283

Evaluation of Audze-Eglājs Criterion for Orthogonal and Regular Triangular Grids

M. Šmídová, V. Sadílek, J. Eliáš, M. Vořechovský, pages 284 - 285

Forced Vibration Analysis of Timoshenko Beam with Discontinuities by Means of Distributions

J. Sobotka, pages 286 - 287

Analytical Solution of Hydrostatic Pocket Tilting

E. Stach, J. Falta, M. Sulitka, pages 288 - 289

Estimation of Pressure Vessel Lower Head Impact Force

P. Štemberk, M. Vaitová, M. Petřík, pages 290 - 291

Dynamic Analysis of Mechatronic System with Ball Screw

J. Stetina, T. Brezina, Z. Hadas, pages 292 - 293

Influence of the Radial Gap Under the Stator Blade on Flow Around the Hub-end of the Rotor Blade

F. Kolařík, B. Patzák, J. Zeman, pages 294 - 295

Stochastic Wang Tiles Generation Using the Discrete Element Method

J. Stránský, M. Doškář, pages 296 - 297

Determination of the Turning Knife Thermal Stress during Longitudinal Turning

M. Stránský, pages 298 - 299

Comparison of Energy Efficiency of the Redundant Actuation of Positioning Axes

K. Šubrt, R. Knoflíček, P. Houška, pages 300 - 301

Frequency Analysis of Torsion Vibration of Hard Rubbers under Finite Deformations

P. Šulc, L. Pešek, V. Bula, J. Cibulka, J. Košina, pages 302 - 303

On the Finite Element Method Application for Approximation of Free-Surface Flows with Surface Tension

P. Sváček, pages 304 - 305

Comparing the Use of Compressible and Incompressible Flow in the FE Model of Human Vocal Folds Self-Oscillation

P. Švancara, J. Horáček, P. Hájek, M Matug, J.G. Švec, pages 306 - 307

Impact of Landslide on Blasting in the Quarry Dobkovičky

B. Svoboda, J. Svoboda, R. Kašpar, pages 308 - 309

Kinematic Excitation of the Rotor

D. Svoboda, pages 310 - 311

Influence of Textile Membrane on Stability of Supporting Steel Arch

O. Svoboda, J. Machacek, pages 312 - 313

Study of Scale Effect in a Starved Elastohydrodynamically Lubricated Contact

P. Svoboda, D. Kostal, I. Křupka, pages 314 - 315

Crash Test of Carbon Composite

M. Syrovátková, M. Petrů, M. Novotná, pages 316 - 317

Influence of Vertebral Compression Fractures on the Deformation in Thoracolumbar Spine

K. Szkoda, C. Pezowicz, pages 318 - 319

The Influence of Facet Joint Load Transmission in the Spine Column on the Mechanical Properties of the Intervertebral Disc in Finite Element Modeling

K. Szkoda, C. Pezowicz, M. Żak, pages 320 - 321

Aeroelastic Response of Slender Full Sky Telescope

A. Tesár, pages 322 - 323

Fluidic Relaxation Oscillators for Microbubble Generation

V. Tesař, pages 324 - 325

Fluidic Oscillators with Active Devices Operating in Anti-Parallel

V. Tesař, pages 326 - 327

Repair Formulations for Fine-Grained Stone Arte-Facts

R. Tišlová, A. Novotná, pages 328 - 329

Influence of the Natural Frequency Mistuning and the Damping and Kinematic Properties of Blades on Subsonic Flutter Stability of Blading

V. Tsymbalyuk, pages 330 - 331

Modeling of Nonlinear Behavior of Textile Composites

S. Urbanová, J. Vorel, M. Šejnoha, pages 332 - 333

Wind Tunnel Experimental Study of Coupled Rocking-Swivelling Model of Guyed Mast Shaft

S. Urushadze, M. Pirner, O. Fischer, pages 334 - 335

Assessment of Vibrations in Museum's Environment

J. Valach, B. Wolf, E. Paulová, S. Urushadze, pages 336 - 337

Numerical Simulation of Interaction of Fluid Flow and Elastic Structure Modelling Vocal Fold

J. Valášek, P. Sváček, J. Horáček, pages 338 - 339

Numerical Simulation of the Speaker's Formant for Different Geometric Configuration of the Human Vocal Tract

T. Vampola, J. Horáček, pages 340 - 341

Computer-Aided Plastic Limit Analysis of Plates

V. Vančík, M. Jirásek, pages 342 - 343

Multidisciplinary Multi-Body Modeling of Machine Tools

J. Vetiska, Z. Hadas, M. Holub, pages 344 - 345

Properties of Ultrafine-Grained Tungsten Prepared by Ball Milling and Spark Plasma Sintering

M. Vilémová, B. Nevrlá, Z. Pala, L. Kocmanová, M. Janata, J. Matějíček, D. Tonarová, pages 346 - 347

Assessment of Carotid Stenoses by the Principle of Fractional Flow Reserve Derived from CT

J. Vimmr, A. Jonášová, O. Bublík, pages 348 - 349

Experimental Investigation of the Flutter Incidence Range for Subsonic Flow Mach Numbers

V. Vlček, M. Štěpán, I. Zolotarev, J. Kozánek, pages 350 - 351

The Influence of Parameters of Interface Contact Elements of the LSB48 Blade's Computational Model on the Resonant Frequencies of the Bladed Disc

J. Voldřich, J. Lazar, pages 352 - 353

Study of Water Jets Collision of High Pressure Flat Jet Nozzles for Hydraulic Descaling

H. Votavová, M. Pohanka, pages 354 - 355

Determining the Distribution of Forces in Reinforcing Bars in Slab-Column Connections of Reinforced Concrete Structures

B. Wieczorek, pages 356 - 357

Numerical Model on the Example of Experimental Investigations of a Punching in the Central Connection of the Slab with the Column Situated Eccentrically

B. Wieczorek, pages 358 - 359

Attempt of Numerical Mapping of a Real Model of Slab-Beam Connection Using the Simplified Shell Model

M. Wieczorek, pages 360 - 361

Proposed Way of Calculating the Value of the Failure Load in the Span Zone of Slab-Column Structures

M. Wieczorek, pages 362 - 363

Numerical Simulation of Aerodynamic Forces Which Have an Impact on the Pantograph

P. Wątroba, pages 364 - 365

Acoustic Emission Localization in the Dynamic Fatigue Testing of a Composite Wing

M. Weis, J. Cejpek, J. Juračka, pages 366 - 367

Issues with Determination of Mean Time to Dangerous Failure and Diagnostic Coverage in Safety Functions of Machine Tools

J. Zahálka, F. Bradáč, J. Tůma, M. Synek, pages 368 - 369

Modelling of Textile Structures

J. Žák, pages 370 - 371

Investigations of Transient Oscillations of Rotors Supported by Magnetorheological Squeeze Film Dampers Using Bilinear Material to Model the Lubricant

J. Zapoměl, J. Kozánek, P. Ferfecki, pages 372 - 373

Prediction of the Nuclear Fuel Rod Abrasion in the Probability Sense

V. Zeman, Z. Hlaváč, pages 374 - 375

Influence of Elastic Characteristics of Regular System on the Vibrodiagostic Parameter Due to the Presence of a Breathing Crack

A. Zinkovskii, V. Kruts, E. Sinenko, I. Tokar, pages 376 - 377

Influence of the Conditions for Coupling of the Shrouds on the Static Stress State of Blade Rings

A. Zinkovskii, K. Savchenko, Y. Kruglii, pages 378 - 379

Testing of Energy Absorption Capability of Sandwich Structures Based on Metal Foams for Design of Protective Helmets

P. Zlámal, T. Fíla, V. Králík, pages 380 - 381

Artificial Neural Network in Approximation of Solution for Short-Cylinder-Shaped Inclusion Problem

L. Zrůbek, A. Kučerová, J. Novák, pages 382 - 383

Text and facts may be copied and used freely, but credit should be given to these Proceedings.

All papers were reviewed by members of the scientific committee.

Engineering Mechanics

International Conference

Proceedings Vol. 21 (2015)

ENGINEERING MECHANICS 2015

papers