Engineering Mechanics

International Conference

Proceedings Vol. 20 (2014)

ENGINEERING MECHANICS 2014

20th INTERNATIONAL CONFERENCE
May 12 – 15, 2014, Svratka, Czech Republic
Editors: Vladimír Fuis

Copyright © 2014 Brno University of Technology Institute of Solid Mechanics, Mechatronics and Biomechanics

ISBN 978-80-214-4871-1 (printed)
ISSN 1805-8248 (printed)
ISSN 1805-8256 (electronic)

scientific commitee

keynote lectures

DESIGN AND APPLICATIONS OF PRESTRESSED TENSEGRITY STRUCTURES
Burša J., Bansod Y.D., pages 30 - 33
RECENT ADVANCES AND PROBLEMS IN LUBRICATED HERTZIAN CONTACTS
Hartl M., Křupka I., Omasta M., Šperka P., pages 34 - 37
DYNAMICS OF SWIRLING FLOWS IN INDUSTRIAL APPLICATIONS
Rudolf P., Štefan D., Pochylý F., pages 38 - 41

papers

BIOMATERIALS USED FOR THE PRODUCTION OF STENTS -HOPES AND LIMITATIONS - REVIEW ARTICLE
Andryszczyk M., Wirwicki M., Topoliński T., pages 44 - 47
PERFORMANCE EVALUATION OF HYDROVAC GRAVITY POWER GENERATION SYSTEM
Ansari M.R.I., Sahir M.H., pages 48 - 51
AUTOMOTIVE PIEZOELECTRIC SENSORS FOR SIMPLIFIED KNOCK DETERMINATION
Aromiński A., pages 52 - 55
PLASTIC HEAT EXCHANGER USING TWISTED HOLLOW FIBERS
Astrouski I., Raudensky M., pages 56 - 59
INTERACTION BETWEEN BENDING MOMENT AND SHEAR FORCE IN STEEL PLATED STRUCTURAL ELEMENTS
Baláž I., Koleková Y., pages 60 - 75
EXPERIMENTAL VALIDATION OF THE AERODYNAMIC FORCE ACTING ON A CONE OF A BALANCED CONTROL VALVE
Bednář L., Miczan M., Tajč L., Hoznedl M., pages 76 - 79
STONE FOR RESTORATION AND DECORATION PURPOSES IN WESTERN SLOVAKIA
Bednarik M., Holzer R., Laho M., Dunčko M., pages 80 - 83
MEASUREMENT OF AIRFLOW IN TRACHEA USING PARTICLE IMAGE VELOCIMETRY AND LASER-DOPPLER ANEMOMETRY
Belka M., Jedelsky J., Boiron O., Bailly L., Bertrand E., Zaremba M., Maly M., Lizal F., pages 84 - 87
INDUSTRIAL MACHINERY DYNAMIC EFFECTS ON PRODUCTION PROCESS AND HALL STRUCTURES
Benčat J., pages 88 - 91
DROPWISE CONDENSATION MODELING
Beňovský P., Rusche H., Ridzoň F., Popovac M., Reichl Ch., Fleckl T., pages 92 - 95
TEMPERATURE FIELD OF SPARK PLUG IN THE SI ENGINE
Beroun S., Brabec P., Dittrich A., Mikulanin L., pages 96 - 99
INJECTOR OF LIQUID LPG
Beroun S., Brabec P., Dittrich A., Nguyen T.T., pages 100 - 103
INTRA-VOXEL MICROELASTO-PLASTICITY FOR CT-BASED PATIENT-SPECIFIC FRACTURE RISK ASSESSMENT OF VERTEBRAE
Blanchard R., Morin C., Vella A., Sant Z., Hellmich Ch., pages 104 - 107
THE FLOW RATE OPTIMIZATION OF DIRECTIONAL PNEUMATIC CONTROL VALVE
Blasiak S., Takosoglu J.E., Laski P.A., pages 108 - 111
ON PARALLELIZATION OF STIFFNES MATRIX ASSEMBLY
Bošanský M., Patzák B., pages 112 - 115
SIMULATION ASSESSMENT OF SUPPRESSION OF MACHINE TOOL VIBRATIONS
Březina T., Březina L., Marek J., Hadaš Z., Vetiška J., pages 116 - 119
APPLICATION OF THE LATTICE BOLTZMAN METHOD FOR THE MODELLING OF PULSATILE FLOW IN IDEALISED BYPASS GEOMETRIES
Bublík O., Jonášová A., Vimmr J., pages 120 - 123
MECHANICAL AND FILTERING PROPERTIES OF NON-SINTERED POROUS SOLIDS FOR FILTRATION APPLICATIONS
Bulejko P., Svěrák T., pages 124 - 127
DETERMINATION OF MATERIAL PARAMETERS OF RUBBER AND RUBBER COMPOSITES BY BIAXIAL LOADING
Čadek M., Marvalová B., Petríková I., Samal S., pages 128 - 131
SOME PROBLEMS WITH THE ESTIMATION OF PROJECTILE TRAJECTORY PERTURBATIONS
Čech V., Jedlicka L., Jevicky L., pages 132 - 135
INFLUENCE OF PROPELLER BLADE FORCE SPANWISE DISTRIBUTION ON WHIRL FLUTTER CHARACTERISTICS
Čečrdle J., pages 136 - 139
IDENTIFICATION OF THE AEROELASTIC PROFILE BASED ON OPTICAL MEASUREMENT
Chládek Š., Zolotarev I., pages 140 - 143
PARAMETER IDENTIFICATION IN INITIAL VALUE PROBLEMS FOR NONLINEAR ORDINARY DIFFERENTIAL EQUATIONS
Chleboun J., Mikeš K., pages 144 - 147
SIMULATION OF MOTION OF MULTIPLE PARTICLES IN A CLOSED CONDUIT USING THE LBM BASED APPROACH
Dolanský J., pages 148 - 151
REDUCING PERIODICITY IN MICROSTRUCTURE RECONSTRUCTION OF HETEROGENEOUS MATERIALS
Doškář M., Novák J., pages 152 - 155
ANALYSIS OF SUBWAY WAGON ROLLER BEARING AXLE BOX STRESSES WITH MEDIUM OPERATION LOAD
Dowkontt Sz., Ostapski W., Tułodziecki M., pages 156 - 159
SIMULATION AND EXPERIMENTAL STUDIES ON THE CONTROL SYSTEM FOR MECHATRONIC REHABILITATION DEVICE WITH KEEP-UP MOVEMENT
Duda S., Gembalczyk G., Lawniczek R., pages 160 - 163
COMPARISON OF DYNAMIC INTERACTIONS IN THE DRIVE SYSTEM OF ELECTRIC LOCOMOTIVE EU07 BEFORE AND AFTER THE MODERNIZATION DRIVE UNIT
Duda S., Gembalczyk G., Lawniczek R., Trawinski T., pages 164 - 167
KINEMATICALLY EXCITED NON-LINEAR VIBRATION OF A BEAM ON ELASTIC SUPPORTS WITH CLEARANCES
Dyk Š., Zeman V., Byrtus M., pages 168 - 171
MODELLING AND INITIAL TESTS OF THE DYNAMIC PROPERTIES OF VIBROINSULATION MATS
Dzikowska W., Żórawski D., Peszyński K., pages 172 - 175
AN IMPROVED THERMAL-STRUCTURAL FINITE ELEMENT MODEL FOR MANUFACTURING PROCESSES WITH HEAT GENERATION
Écsi L., Jančo R., Élesztős P., pages 176 - 179
DEM SIMULATION OF BALLAST OEDOMETRIC TEST
Eliáš J., pages 180 - 183
SIMULATION AND IMPLEMENTATION OF TURBOCHARGING A 600CC ENGINE FOR FORMULA SAE
Farrugia M., Grech N., Chircop M., Azzopardi J.P., pages 184 - 187
EXPERIMENTAL ANALYSIS OF A FIXED-SPEED AND A VARIABLE-SPEED AIR CONDITIONING SYSTEM
Fenech G., Farrugia M., pages 188 - 191
COMPARISON OF PROPELLER ANALYSIS METHODS AND EXPERIMENTAL DATA
Filipský J., Štorch V., pages 192 - 195
BLAST PERFORMANCE OF FRC SPECIMENS WITH STEEL FIBERS OF LOW DUCTILITY
Foglar M., Kovář M., pages 196 - 199
EXTERNAL AND INTERNAL FIXATORS FOR TREATMENT OF COMPLICATED FRACTURES IN TRAUMATOLOGY AND ORTHOPAEDICS
Frydrýšek K., Pleva L., Pompach M., Učeň O., Fojtík F., Kubín T., Theisz G., Žilka L.,Poruba Z., pages 200 - 207
SHAPE DEVIATIONS ANALYSIS OF THE ALIGNED BARS
Fuis V., pages 208 - 211
PROPOSITION OF CONSTITUTIVE MODEL FOR FIBREREINFOCED HYPERELASTIC MATERIALS
Gajewski M., Jemioło S., pages 212 - 215
BASE ISOLATION SYSTEMS IN BUILDING STRUCTURES
Gołębiowska I., Sakiewicz W., pages 216 - 220
CONCRETE DETERIORATION DUE TO AGGRESSIVE ENVIRONMENT AND CYCLIC LOADING – THEORETICAL STUDY
Göringer J., Foglar M., pages 221 - 224
INFLUENCE OF REDUCER DISK BALANCE ON FLEXURAL VIBRATION OF PROPELLER SHAFT
Hać M., Ostapski W., pages 225 - 228
ENERGY HARVESTING ANALYSIS OF BODY MOTION AS ENERGY SOURCE FOR BIOMEDICAL DEVICES
Hadas Z., Vetiska J., pages 229 - 232
EXPERIMENTAL EVALUATION OF THE EFFECTS OF A CONCRETE BARRIER TO PRESSURE WAVE PROPAGATION
Hájek R., Foglar M., pages 233 - 236
NUMERICAL MODELLING OF INTERACTION BETWEEN PRESSURE WAVE AND RIGID BARRIER
Hájek R., Foglar M., pages 237 - 240
EXPERIMENTAL VERIFICATION OF THEORETICAL MODELS TO CALCULATE THE HEAT TRANSFER COEFFICIENT IN THE SHELL-ANDTUBE HEAT EXCHANGER
Havlík J., Dlouhý T., pages 241 - 244
MODIFIED COMPACT TENSION TEST: THE INFLUENCE OF THE STEEL BARS POSITION
Holušová T., Seitl S., Fernandéz-Canteli A., pages 245 - 248
MEASUREMENT OF VIBRATION, FLOW AND ACOUSTIC CHARACTERISTICS OF A HUMAN LARYNX REPLICA
Horáček J., Bula V., Radolf V., Vampola T., Dušková M., pages 249 - 252
HEAT TRANSFER SIMULATION OF HEAT EXCHANGERS MADE BY POLYMERIC HOLLOW FIBERS
Hřibová V., Komínek J., Astrouski I., Raudenský M., Tseng A.A., pages 253 - 256
NUMERICAL SOLUTION OF INVISCID TRANSONIC FLOW IN A CHANNEL WITH COMPLEX EQUATION OF STATE
Hric V., Halama J., Fürst J., pages 257 - 260
A STABILITY CRITERION OF AN ORTHOTROPIC BI-MATERIAL NOTCH BASED ON THE STRAIN ENERGY DENSITY
Hrstka M., Profant T., Klusák J., Ševeček O., Kotoul M., pages 261 - 264
DEVELOPMENT OF MATHEMATICAL MODEL OF RAIN ZONE
Hyhlík T., pages 265 - 268
OPTIMISATION IN THE EXPLICIT ANALYSIS OF THE ROAD BARRIERS
Iván L., Popovič M., pages 269 - 272
SIMULATION OF DROP TESTS OF THE CASK FOR RADIOACTIVE WASTE
Ivančo V., Orečný M., Huňady R., pages 273 - 276
STRESS-STRAIN ANALYSIS OF CERAMIC HEADS IN THE DESTRUCTION DEVICE
Janíček P., pages 277 - 280
EFFICIENT BAYESIAN PARAMETER IDENTIFICATION
Janouchová E., Kučerová A., Sýkora J., pages 281 - 284
STUDY OF EXTERNAL COOLING OF STEAM GENERATOR PGV-1000M COLLECTORS POCKET WELD № 111 FOR SUPPRESSING OF STRESS CORROSION CRACKING
Joch L., Krautschneider R., pages 285 - 288
SIMULATION OF CONTRAST MEDIUM PROPAGATION BASED ON 1D AND 3D PORTAL HEMODYNAMICS
Jonášová A., Bublík O., Rohan E., Vimmr J., pages 289 - 292
REDUCTION FOR HIGH-RISE BUILDINGS SEISMIC ANALYSIS
Kabeláč J., Rossier S., pages 293 - 296
LATERAL-TORSIONAL BUCKLING OF I-SECTION BEAMS WITH INITIAL RANDOM IMPERFECTIONS
Kala Z., Valeš J., pages 297 - 300
COMPUTER NUMERICAL SOLUTION OF VON MISES PLANAR TRUSS BY THE POTENTIAL ENERGY
Kalina M., pages 301 - 304
BIOLOGICAL SOFT TISSUES: MECHANICAL CHARACTERIZATION, DATA ANALYSIS AND MODELS’ EVALUATION
Kazakevičiūtė-Makovska R., pages 305 - 308
CFD ANALYSIS OF FLOWS IN A HIGH-PRESSURE NATURAL GAS PIPELINES WITH DIFFERENT SHAPES OF ORIFICE PLATES
Kiš R., Malcho M., Janovcová M., pages 309 - 312
LASER TRACKER MEASUREMENT FOR PREDICTION OF WORKPIECE GEOMETRIC ACCURACY
Knobloch J., Holub M., Kolouch M., pages 313 - 316
IMPLEMENTATION OF STABILIZED FORMULATION FOR LEVEL SET EQUATION
Kolařík F., Patzák B., pages 317 - 320
INTERACTION BETWEEN BENDING MOMENT AND SHEAR FORCE IN ALUMINIUM PLATED STRUCTURAL ELEMENTS
Koleková Y., Baláž I., pages 321 - 330
THE INFLUENCE OF FROST RESISTANCE ON UHPC PLATES WITH DIFFERENT TYPES OF TEXTILES ARMATURES
Kostelecká M., Kolísko J., Bittner T., Huňka P., Mandlík T., pages 331 - 334
CORROSION OF REINFORCEMENT VERSUS RELIABILITY OF RC GIRDERS
Koteš P., Vičan J., pages 335 - 338
FITTING MODEL PARAMETERS OF PRESTRESSED CONCRETE BRIDGE: COMPUTATIONAL ASPECTS
Koudelka T., Kruis J., Lepš M., Nosek J., pages 339 - 342
METHODS OF A BUILDING STONE INTERNAL STRUCTURE STUDY
Kovářová K., Ševčík R., pages 343 - 346
ENERGY ABSORPTION OF CELLULAR FOAMS IN HIGH STRAIN RATE COMPRESSION TEST
Králík V., Němeček J., Jíra A., Fíla T., Zlámal P., pages 347 - 350
ANALYSIS OF DYNAMIC RESPONSE OF FOOTBRIDGE VEVEŘÍ ON PEDESTRIAN LOAD
Kratochvíl O., Križan J., pages 351 - 354
ASSESSMENT OF THE CONSTITUTIVE PROPERTIES OF REACTOR STEEL USING AN INVERSE ANALYSIS ON THE SMALL PUNCH TEST
Krčmář M., Materna A., pages 355 - 358
MULTIPLE INDOOR ROBOT LOCALIZATION USING INFRARED BEACONS
Krejsa J., Vechet S., Chen K., pages 359 - 362
MORPHOMETRY AND RECONSTRUCTION OF HEPATIC LOBULES IN PIG BASED ON SERIAL HISTOLOGICAL SECTIONS
Kubíková T., Witter K., Liška V., Tonar Z., pages 363 - 366
A COMPUTATIONAL MODEL OF POWERTRAIN COMPONENTS IN SIMULINK
Kučera P., Píštěk V., pages 367 - 370
STOCHASTIC MODELLING OF HETEROGENEOUS MATERIALS BASED ON IMAGE ANALYSIS
Kučerová A., Sýkora J., Zeman J., pages 371 - 374
PERFORMANCE COMPARISON OF LOCALIZATION LIMITERS
Květoň J., Eliáš J., pages 375 - 378
NUMERICAL SIMULATION OF THE TURBULENT COMPRESSIBLE GAS FLOW IN THE VANELESS MACHINES
Kyncl M., Pelant J., pages 379 - 382
A DELTA TYPE CLOSED KINEMATICS CHAIN WITH PNEUMATIC MUSCLE ACTUATOR MANIPULATOR
Laski P.A., Takosoglu J.E., Blasiak S., pages 383 - 386
INVESTIGATION OF PROCESS DYNAMICS OF TBM EXCAVATION
Lazarová E., Krúpa V., Ivaničová L., Kruľáková M., pages 387 - 390
IDENTIFICATION OF VIBRATION CAUSES BASED ON SPECTROGRAMS DURING THE STRAIGHTENING PROCESS
Lošák P., pages 391 - 394
STUDY ON SHEAR CONNECTION BETWEEN BRIDGE STEEL TRUSS AND CONCRETE SLAB
Machacek J., Charvat M., pages 395 - 398
NUMERICAL ESTIMATION OF MICRO CRACK PATHS IN POLYMER PARTICULATE COMPOSITE
Majer Z., Náhlík L., pages 399 - 402
IMPACT OF MISSILE ON CONCRETE OR SOIL OBSTACLE
Makovička D., Makovička D., pages 403 - 406
PLASTIC ZONE EXTENT IN A CCT SPECIMEN DETERMINED FROM THE CRACK-TIP STRESS FIELD APPROXIMATED BY MEANS OF THE WILLIAMS EXPANSION
Malíková L., pages 407 - 410
AN ALGORITHM FOR ¨ COMPUTATIONAL SIMULATION OF MANDIBLE BONE MODELING AND REMODELING AROUND DENTAL IMPLANTS
Marcián P., Borák L., Narra N., Skalka P., Kaiser J., Wolff J., pages 411 - 414
ON AN ESTIMATION OF THE EXPONENT OF THE STRESS SINGULARITY: THREE DIMENSIONAL PROBLEMS AND EFFECT OF RESIDUAL STRESSES ON A CRACK ARRESTED ON THE INTERFACE
Máša B., Náhlík L., Hutař P., pages 415 - 418
FRACTURE MECHANICS ASSESSMENT OF CRACKED WELDED POLYOLEFIN PIPES
Mikula J., Ševčík M., Hutař P., Náhlík L., pages 419 - 422
COMPARATIVE ANALYSIS OF BURZYŃSKI-TORRE STRENGTH HYPOTHESIS FOR DENTINE AND ENAMEL
Milewski G., pages 423 - 426
INVESTIGATION OF THE SPRAY GENERATED BY A Y-JET ATOMIZER
Mlkvik M., Zaremba M., Jedelský J., Wigley G., pages 427 - 430
COMPARISON OF METHODS FOR CONSTRAINED DESIGN OF COMPUTER EXPERIMENTS
Myšáková E., Lepš M., pages 431 - 434
ESTIMATION OF CRITICAL STRESS VALUES FOR CRACK INITIATION FROM SHARP V-NOTCHES
Náhlík L., Štegnerová K., Hutař P., pages 435 - 438
POST-CRITICAL MULTI-MODAL VIBRATION OF A CONTINUOUS INVERSE PENDULUM TYPE SYSTEM
Náprstek J., Fischer C., pages 439 - 442
AEROELASTIC DIVERGENCE MODELED BY MEANS OF THE STOCHASTIC RESONANCE
Náprstek J., Pospíšil S., pages 443 - 446
BIOMECHANICAL TESTING OF SPINAL SEGMENT FIXED BY ARCOFIX SYSTEM
Návrat T., Florian Z., Kočiš J., Vosynek P., pages 447 - 450
ANALYSIS OF DAMAGED CONNECTION PIPING
Nekvasil R., Lošák P., Lukáč P., pages 451 - 454
EFFECTIVENESS OF KINETIC ENERGY RECOVERY EXPLORED BY MEANS OF EXPERIMENTAL STAND
Nevrlý J., Němec Z., Jurík M., pages 455 - 458
CORRELATION BETWEEN ENHANCED MECHANICAL STRENGTH AND MICROSTRUCTURE ELIABILITY OF GEO-COMPOSITE
Nhan P.T., Samal S., Petrikova I., Marvalová B., pages 459 - 462
PASSIVE ELEMENTS FOR PRECISE DIRECTION AND MANAGEMENT OF AIR IN DATA RACKS
Novotný J., Matěcha J., Pohan P., pages 463 - 466
ANALYSIS OF SLIDE BEARING COMPUTATIONAL MODELS CONSIDERING ELASTIC DEFORMATIONS AND ROUGH SURFACES
Novotný P., Maršálek O., Zubík M., Drápal L., pages 467 - 470
REVITALISATION OF INDUSTRIAL ROBOT CONTROL SYSTEMS
Nowicki K., Kolber P., Perczyński D., Wawrzyniak S., pages 471 - 474
SIMULATION TESTS OF IRB6 ROBOT
Nowicki K., Perczyński D., Kolber P., Peszyński K., pages 475 - 478
MODEL OF THE RELIABILITY PREDICTION OF MASONRY WALLS
Nowogońska B., pages 479 - 482
COMPARISON OF MODAL PARAMETER ESTIMATION TECHNIQUES FOR EXPERIMENTAL MODAL ANALYSIS
Ondra V., Lošák P., pages 483 - 486
KINEMATIC MODEL OF MECHANICAL DESIGN FOR SUPPORT HUMAN LOWER LIMB
Ostaszewski M., Siemieniako F., pages 487 - 490
OPTIMIZATION OF VALVE MANIFOLD TIMING SEQUENCE USING DIFFERENTIAL EVOLUTION ALGORITHM
Panáček P., Klapka M., Němec Z., pages 491 - 494
THERMODYNAMICS PROPERTIES OF COPPER HALIDE ALLOY (CuBr0.5Cl0.5)
Parham E., pages 495 - 498
SENSITIVITY OF ACTION POTENTIAL TO CHANGES OF INWARD RECTIFIER POTASSIUM CURRENT IK1 IS DIFFERENT IN RECENT MODELS OF HUMAN VENTRICULAR CARDIOMYOCYTES
Pásek M., Šimurda J., Christé G., pages 499 - 502
PRINCIPLES OF VIBRATION IMPACT ON CRACKED METHANEBEARING COAL SEAM
Pavlenko M.V., pages 503 - 506
ACOUSTIC FREQUENCIES OF COOLANT IN PRIMARY CIRCUIT OF NPP TEMELIN AND POSSIBILITY OF RESONANCES WITH FUEL ASSEMBLY TVSA-T
Pečínka L., Švrček M., pages 507 - 510
MINIMISING OF THE OPERATION COSTS OF POWER TRANSFORMERS
Perczyński D., Kolber P., Wawrzyniak S., pages 511 - 514
SOLVING ANCHORAGE AREA PRESTRESSED AND NONPRESTRESSED COMPOSITES
Podolka L., pages 515 - 518
THE EFFECT OF THRESHOLD VALUE ON THE RESIDUAL FATIGUE LIFETIME OF RAILWAY AXLES
Pokorný P., Náhlík L., Hutař P., pages 519 - 522
UTILIZING OF A WEIGHT-FIBRE-PULLEY-DRIVE MECHANICAL SYSTEM FOR THE INVESTIGATION OF A FIBRE BEHAVIOUR
Polach P., Hajžman M., pages 523 - 532
THE EXACT SOLITION OF ELASTICITY MIXED PLAIN BOUNDARY VALUE PROBLEM IN A RECTANGULAR DOMAIN
Popov G., Vaysfeld N., Zozulevich B., pages 533 - 536
ADAPTIVE UPDATE OF SURROGATE MODELS FOR RELIABILITY-BASED DESIGN OPTIMIZATION: A REVIEW
Pospíšilová A., Lepš M., pages 537 - 540
FINITE ELEMENT ANALYSIS OF COMPRESSION OF LUMBAR SPINE WITH DYNAMIC IMPLANT
Prášilová E., Florian Z., Marcián P., pages 541 - 544
SINGLE CRACK BEHAVIOR OF FIBER REINFORCED LIMEBASED MORTAR
Přinosil M., Kabele P., pages 545 - 548
VIBRATIONS OF BLADES BUNCHES
Půst L., Pešek L., pages 549 - 554
METHODS OF DETECTING THE UNDESIRABLE OBJECTS ON BELT CONVEYORS
Pustułka A., pages 555 - 558
AIR-PRESSURE CHARACTERISTICS AND VISUALIZATION OF BUBBLING EFFECT IN WATER RESISTANCE THERAPY
Radolf V., Horáček J., Bula V., Laukkanen A.M., pages 559 - 562
STRUCTURAL TECHNICAL INSPECTION AND PROJECT PREPARATION FOR RECONSTRUCTION OF REINFORCED CONCRETE RAILWAY VIADUCT IN KRNSKO
Řeháček S., Vacek V., Kolísko J., Huňka P., Čítek D., Brodňan M., pages 563 - 566
STRAIN ANALYSIS OF BONE HEALING
Řehák K., Skallerud B., pages 567 - 570
NUMERICAL EXPLICIT ANALYSIS OF ABSORBING MATERIALS USED IN MULTILAYER MINE PROTECTION
Řídký R., Buchar J., Rolc S., Drdlová M., Krátký J., pages 571 - 574
PARALLEL NUMERICAL COMPUTATION OF DISTRIBUTION OF PRESSURE PAST AN OSCILLATING AIRFOIL NACA0015
Řidký V., Šidlof P., pages 575 - 578
MODELING AND OPTIMIZATION OF SHAPES AND INTERFACES IN VIBROACOUSTIC
Rohan E., Lukeš V., Novotný Z., pages 579 - 582
MATHEMATICAL DESCRIPTION OF BEHAVIOUR OF A HUMAN BODY DURING WALKING – STANCE PHASE
Šána V., Polák M., pages 583 - 586
MICROMECHANICS APPLIED TO MACRO-MODEL OF A SPINAL SEGMENT
Sant Z., Vella A., Blanchard R., Hellmich Ch., pages 587 - 590
EXPERIMENTAL MODAL ANALYSIS OF WASHING MACHINE PULLEY
Schrötter M., Hagara M., Lengvarský P., pages 591 - 594
LOCALIZATION PROBLEM OF COUPLED DUCTILE FAILURE MODELS COMPARED TO UNCOUPLED ONES
Šebek F., Kubík P., Petruška J., pages 595 - 598
BSFC PREDICTION OF A DIESEL ENGINE FUELLED WITH BIODIESEL BY RSM
Shirneshan A., pages 599 - 602
FRACTURE TOUGHNESS OF KAOLIN FIRED AT DIFFERENT TEMPERATURES
Šín P., Sergejev F., Štubňa I., pages 603 - 606
ANALYSIS OF DYNAMIC LOADING OF BAR STRAIGHTENING MACHINE COMPONENTS
Skalka P., Sobotka J., pages 607 - 610
FREE VIBRATION ANALYSIS OF TIMOSHENKO BEAM WITH DISCONTINUITIES USING DISTRIBUTIONS
Sobotka J., pages 611 - 614
INFLUENCE OF THE BENDING RIGIDITY FACTOR ON VIBRATION AND INSTABILITY OF A COLUMN WITH INTERNAL CRACK
Sokół K., pages 615 - 618
ON POSSIBILITIES OF DIAGNOSING OF CATERPILLAR UNDERCARRIAGES IN LARGE-SIZE WORKING MACHINES
Sokolski P., pages 619 - 622
CALCULATING THE AIR FLOW VELOCITY IN AIR CAVITIES IN WALLS
Solař J., pages 623 - 626
INFLUENCE OF AIRFLOW-RIVULET INTERACTION ON CIRCULAR CYLINDER IN UNIFORM FLOW
Soltys R., Tomko M., pages 627 - 630
THEORETICAL AND NUMERICAL SOLUTION OF A NEAR SONIC FLOW CONSIDERING THE OFF-DESIGN CONDITIONS
Stodulka J., Sobieczky H., pages 631 - 634
COMBINATION OF FEM AND DEM WITH APPLICATION TO RAILWAY BALLAST-SLEEPER INTERACTION
Stránský J., pages 635 - 638
APPLICATION OF SIMPLIFIED MECHANICAL MODEL FOR DESCRIPTION OF SPECIMEN SIZE EFFECT ON RESISTANCE AGAINST STABLE TEARING
Stratil L., Šiška F., Hadraba H., Dlouhý I., pages 639 - 642
EXPERIMENTAL EVALUATION OF MR DAMPER TIME RESPONSE ON MODIFIED GROUNDHOOK ALGORITHM EFFICIENCY
Strecker Z., Roupec J., Kubík M., Friedel D., pages 643 - 646
EVALUATION OF THE AREAL TEXTILE THINNING
Stříž B., Vyšanská M., pages 647 - 650
AN APPLICATION OF ULTRASOUNDS TO ASSESSMENT OF HARMFUL SALTS ACCUMULATION IN THE BODY OF TRADITIONAL CERAMICS
Stryszewska T., Kańka S., pages 651 - 654
HYBRID METHOD FOR DETERMINING FATIGUE CHARACTERISTIC IN HIGH CYCLE LIFE
Strzelecki P., Sempruch J., pages 655 - 658
NUMERICAL SIMULATION OF VIDEOKYMOGRAPHIC IMAGES FROM THE RESULTS OF THE FINITE ELEMENT MODEL
Švancara P., Horáček J., Martínek T., Švec J.G., pages 659 - 662
RHIZARTHROSIS AND ITS TREATMENT, STRESS AND DEFORMATION ANALYSIS OF THE TOTAL JOINT REPLACEMENT
Svojanovský T., Trtík L., pages 663 - 666
NUMERICAL MODEL FOR HISTORICAL MORTARS EXPOSED TO FREEZING TEMPERATURES
Sýkora J., pages 667 - 670
HUMAN SAFETY CRITERIA FOR EXISTING BRIDGES CONSIDERING EMERGENCY AND CRISIS SITUATIONS
Sýkora M., Holický M., Lenner R., Manas P., pages 671 - 674
INNOVATIVE MODULAR PNEUMATIC VALVE TERMINAL WITH SELF-DIAGNOSIS, CONTROL AND NETWORK COMMUNICATIONS
Takosoglu J.E., Laski P.A., Blasiak S., pages 675 - 678
COMPUTER NONLINEAR ANALYSIS OF THE INFLUENCE OF MATERIAL CHARACTERISTICS ON THE RESPONSE OF A BASEMENT STRUCTURE LOADED BY GROUND WATER BUOYANCY
Tej P., Vacek V., Kolísko J., Čech J., Lo Monte F., pages 679 - 682
AEROELASTICITY OF SLENDER FACADE SHEETS
Tesár A., pages 683 - 686
ATOMISER WITH EXCITATION BY A FLUIDIC OSCILLATOR
Tesař V., Hykl J., pages 687 - 705
ROBUST CONTROL ALGORITHM FOR PMSM MOTOR WITH HALL POSITION SENSORS
Toman J., Szabo I., Singule V., pages 706 - 709
PRACTICAL IMPLEMENTATION OF SELECTED MEAN STRESS MODELS FOR RESULTS OF FATIGUE TESTS REALIZED FOR MINI SPECIMEN
Tomaszewski T., Sempruch J., pages 710 - 713
HOMOGENIZATION OF THE ELECTRO-OSMOSIS PHENOMENA IN THE CORTICAL BONE POROUS STRUCTURE
Turjanicová J., Rohan E., pages 714 - 717
THE INFLUENCE OF DIFFERENT IMPLEMENTATION OF PERIODIC BOUNDARY CONDITIONS INTO FEM SOFTWARE
Urbanová S., Vorel J., Šejnoha M., pages 718 - 721
BIFURCATION LOAD OF A COLUMN COMPOSED OF PIPE AND ROD WITH TWO-PARAMETRIC ELASTIC ELEMENT
Uzny S., pages 722 - 725
NUMERICAL SIMULATION OF VIDEO-KYMOGRAPHIC RECORDS OF THE VOCAL FOLDS VIBRATION
Vampola T., Horáček J., pages 726 - 729
CONCENTRATION DISTRIBUTION OF COARSE-GRAINED PARTICLE-WATER MIXTURE IN HORIZONTAL PIPE
Vlasak P., Chara Z., Konfršt J., Krupička J., pages 730 - 736
FLUTTER AT A LOW VELOCITY
Vlček V., Kozánek J., Zolotarev I., pages 737 - 740
TRACKING OF IMPINGING JET FLAME
Vondál J., Steen M., Tummers M.J., pages 741 - 744
NUMERICAL INVESTIGATION OF SHEAR BEHAVIOR SHCC STRUCTURAL ELEMENTS
Vorel J., Boshoff W.P., pages 745 - 748
MODELING AND SIMULATION OF THE RECUPERATIVE HEAT EXCHANGER
Wawrzyniak S., Peszyński K., pages 749 - 752
NUMERICAL MODELLING OF THE DESTRUCTION OF THE REINFORCEMENT BARS IN THE SUPPORTING ZONE OF THE COLUMN
Wieczorek B., pages 753 - 756
THEORETICAL ALGORITHM TO ASSESS THE VALUES OF THE BREAKING LOAD OF THE BARS SITUATED IN THE SUPPORTING ZONE OF THE SLAB-COLUMN CONNECTION
Wieczorek B., pages 757 - 760
NUMERICAL ANALYSIS OF NARROW SINGLE-SPAN, GRAVITATIONALLY LOADED CONCRETE SLABS REINFORCED STEEL WITH A MEAN DUCTILITY
Wieczorek M., pages 761 - 764
NUMERICAL ANALYSIS OF THE DEFORMATION OF THE CORNER PART OF THE SLAB-COLUMN STRUCTURES
Wieczorek M., pages 765 - 768
ON THE STRAIN-HARDENING PARAMETERS OF S355J2H STEEL CONSIDERING THE INFLUENCE OF TEMPERATURE
Winczek J., Ziobrowski P., pages 769 - 772
ZIRCONIUM DIOXIDE – STATIC TEST ON GLUED CONNECTIONS
Wirwicki M., Topoliński T., pages 773 - 776
A NUMERICAL ANALYSIS OF THE FLOW THROUGH THE ELBOW IN THE BOILER PULVERIZED COAL SYSTEM
Wydrych J., Borsuk G., Dobrowolski B., pages 777 - 780
DYNAMIC FIELD BALANCING OF SENSITIVE ROTOR
Zachwieja J., pages 781 - 784
MECHANICAL BEHAVIOR OF THE LAMELLAE ANNULUS FIBROSUS IN FINITE ELEMENT MODEL
Żak M., Słowiński J., Pezowicz C., pages 785 - 788
COMPARATIVE SIMULATIONS OF GUIDING BEHAVIOUR OF AN ELECTRIC LOCOMOTIVE
Zelenka J., Michálek T., Kohout M., pages 789 - 792
SEISMIC RESPONSE OF NUCLEAR FUEL ASSEMBLY COMPONENTS
Zeman V., Hlaváč Z., pages 793 - 796
MODELLING OF THE VIBRATING DRYER DRIVE SYSTEM
Żórawski D., Dzikowska W., Peszyński K., pages 797 - 800
PREDICTION OF ESHELBY'S INCLUSION PROBLEM SOLUTION USING ARTIFICIAL NEURAL NETWORK
Zrůbek L., Kučerová A., Novák J., pages 801 - 804

Text and facts may be copied and used freely, but credit should be given to these Proceedings.

All papers were reviewed by members of the scientific committee. 






  

  

    

Publication Ethics - Ethical guidelines for publication




Webmaster contact: admin@it.cas.cz






imce
  Powered by
Imce 3.20  © 2023, Pavel Formánek, Institute of Thermomechanics AS CR, v.v.i. [generated: 0.0343s]