List of Papers  

The list is ordered by the reference number.
click here to sort by: First Author  Sections  Ref. Number

6  33  60  92  131  181  213  235  277  311 
Id Title
Authors
Section
6Resonance behaviour of spherical pendulum – influence of damping (Extended Abstract)
C. Fischer, J. Náprstek, S. Pospíšil
DYN
9Software prediction of non-stationary heating of shell moulds for manufacture of artificial leathers (Extended Abstract)
M. Hušek, A. Potěšil
TER
12Scalable algorithm for non-linear problems of solid mechanics (Extended Abstract)
J. Dobiáš, S. Pták, Z. Dostál, T. Kozubek, A. Markopoulos
SOL
14The use of rubber vibro-base isolation to decrease structure dynamic response (Extended Abstract)
D. Makovička, D. Makovička
DYN
15Aeroelastic certification of light sport aircraft according LTF regulation (Extended Abstract)
J. Čečrdle, V. Hlavatý
DYN
16Investigations of orthotropic decks (Extended Abstract)
S. Urushadze, L. Frýba, M. Pirner
DYN
17Comparison of approaches to prevention of injuries, accidents and incidents between the Czech Republic and Russia (Extended Abstract)
L. Mukhametzianova, L. Kotek
MCT
18Open source FEM-DEM coupling (Extended Abstract)
J. Stránský, M. Jirásek
SOL
19Kinematical excited vibration of the nuclear fuel assembly (Extended Abstract)
V. Zeman, Z. Hlaváč
DYN
20Dependence of saltation parameters on bed roughness and bed porosity (Extended Abstract)
I. S. Kharlamova, P. Vlasák
FLU
22Experimental and numerical verification of vortex induced vibration of hangers on the footbridge (Extended Abstract)
S. Urushadze, M. Pirner, S. Pospíšil, R. Král
DYN
23Design of universal control unit for brushless dc motors (Extended Abstract)
J. Toman, J. Hrbáček, V. Singule
MCT
24B-spline finite element method in one-dimensional elastic wave propagation problems (Extended Abstract)
R. Kolman, J. Plešek, M. Okrouhlík
CME
26On applications of distributions to analysis of circular plate design elements (Extended Abstract)
J. Sobotka
SOL
27Effect of patch repair on fatigue behavior (Extended Abstract)
M. Benachour, N. Benachour, F. Z. Seriari, M. Benguediab
FRA
28Numerical modelling of engineered cement-based composites (Extended Abstract)
J. Vorel, W. P. Boshoff
SOL
29Mathematical modelling of a damping element working on the principle of squeezing two layers of normal and magnetorheological oils arranged in series and its application for vibration attenuation of a rigid rotor (Extended Abstract)
J. Zapoměl, P. Ferfecki, J. Kozánek
DYN
30Mobile robot tracking using image processing (Extended Abstract)
J. Krejsa, S. Věchet, T. Ripel
MCT
31Flow conditions in the last stage during idling operation and low output of 1000MW turbine (Extended Abstract)
L. Tajč, L. Bednář, M. Hoznedl
FLU
32Generalized linear model with aero-elastic forces variable in frequency and time domains (Extended Abstract)
J. Náprstek, S. Pospíšil
DYN
33Mechanical design of the active orthosis (Extended Abstract)
T. Ripel, J. Krejsa
MCT
34New approaches to assessment of stress and strain fields with application of PhotoStress method (Extended Abstract)
F. Trebuňa, P. Frankovský, J. Jadlovský
SOL
35Turbulences in artificial boundary layer of fotovoltaic power plants (Extended Abstract)
A. Tesár
DYN
36Application of chaotic dynamics in natural and technical sciences (Extended Abstract)
C. Kratochvíl, P. Švéda, M. Hortel, A. Škuderová, M. Houfek
KEY
37Modeling of fiber bridging in multiply-cracking mortar (Extended Abstract)
M. Přinosil, P. Kabele
HIS
38Non-Newtonian effects of pulsatile blood flow in a realistic bypass graft geometry (Extended Abstract)
J. Vimmr, A. Jonášová, O. Bublík
CME
41Applicability of existing indexes of non-proportionality of damping in case of theoretical model of slender structure with installed TMD (Extended Abstract)
S. Hračov, S. Pospíšil, J. Náprstek
DYN
42Applied method for design optimization of hydrostatic guideway on real machine tool (Extended Abstract)
M. Mareš, E. Stach, T. Holkup
SOL
45Local integral formulations for thin plate bending problems (Extended Abstract)
L. Sátor, V. Sládek, J. Sládek
SOL
46Experimental investigation of pedestrian level winds using multiple measuring methods (Extended Abstract)
D. Zacho, P. Michálek
FLU
48Bending of functionally graded circular plates with piezoelectric layer by the MLPG method (Extended Abstract)
P. Staňák, J. Sládek, V. Sládek, S. Krahulec
SOL
49Utilization of instant reality software for motion visualization (Extended Abstract)
J. Hrbáček, T. Novotný
MCT
50Motion capturing control for parallel kinematics robot (Extended Abstract)
J. Augste, T. Novotný
MCT
51The study of polymeric hollow fiber heat exchangers (Extended Abstract)
I. Astrouski, M. Raudenský
TER
52Influence of water temperature on heat transfer coefficient in spray cooling of steel surfaces (Extended Abstract)
M. Chabičovský, M. Raudenský, M. Hnízdil
TER
54Validation of the point-mass modelling approach for fibres in the inverted pendulum model (Extended Abstract)
P. Polach, M. Hajžman, O. Tuček
DYN
55Active vibration control of a cantilever beam (Extended Abstract)
J. Tůma
DYN
56Crack analysis in magnetoelectroelastic solids (Extended Abstract)
S. Krahulec, J. Sládek, V. Sládek, P. Staňák
SOL
57Structure of flow fields downstream of two different swirl generators (Extended Abstract)
D. Štefan, P. Rudolf, S. Muntean, R. F. Susan-Resiga
FLU
58Compensation of irregular motion of a machine tool feed drive axis (Extended Abstract)
J. Moravec
MCT
60Motion of rotating spherical particles touching a wall (Extended Abstract)
Z. Chára, P. Vlasák, I. Keita
FLU
61Singular cases of planar and spatial parallel manipulator (Extended Abstract)
L. Brezina, L. Houfek
MCT
62Methodology for determination of moisture distribution (Extended Abstract)
J. Skramlik, M. Novotny, K. Suhajda
FLU
63Use of electro-magnetic damping for vibration control (Extended Abstract)
G. J. Stein, R. Darula, S. Sorokin
DYN
64Sedimentation of dilute suspension in intermediate region (Extended Abstract)
P. Vlasák, Z. Chára
FLU
65The secular equation for surface waves in 2D anisotropic elastodynamics (Extended Abstract)
J. Červ, J. Plešek
CME
67Determination of burst pressure of thin-walled pressure vessels (Extended Abstract)
Ľ. Gajdoš, M. Šperl
FRA
69Transmissibility of suspended seat loaded with passive mass and with human driver – discussion (Extended Abstract)
M. Apetaur, B. Janeček, J. Šklíba
DYN
70The laminar flow solution in the plane by eigenmode expansion (Extended Abstract)
H. Krausová
FLU
72Simulation of vehicle track dynamic loading (Extended Abstract)
M. Chalupa, R. Vlach
DYN
73Enigma of submerged fence skin friction sensor (Extended Abstract)
V. Tesař
FLU
74Testing of mechanical properties of natural stones used as a building material (Extended Abstract)
H. Hasníková
HIS
75Cyclic loading of masonry walls and its anti seismic strengthening (Extended Abstract)
M. Wünsche, S. Hračov, S. Pospíšil, S. Urushadze
HIS
78Numerical simulation and experiment swith the profile NACA 0012 (Extended Abstract)
Š. Chládek, I. Zolotarev, V. Uruba
FLU
79Homogenized phononic plates and wave dispersion (Extended Abstract)
E. Rohan, R. Cimrman, B. Miara
CME
81Development and modeling of a biomechatronic sensor effector boot device (Extended Abstract)
A. Platonov, L. Ilieva-Mitutsova, I. Chavdarov, N. Serbenyuk, O. Trifonov, V. Yaroshevsky
MCT
87Computational study of sludge pump design with vortex impeller (Extended Abstract)
M. Červinka
FLU
88Experimental device for testing of servomechanisms of the passive optoelectronic rangefinder (Extended Abstract)
V. Čech, M. Červenka, P. Snopek, I. Trávníček, V. Václavík
MCT
89Influence of the geometric configurations of the human vocal tract on the voice production (Extended Abstract)
T. Vampola, J. Horáček
BIO
90Numerical analysis of thermal fields in the insulated cover of tire curing presses (Extended Abstract)
M. Hynek, P. Votapek
TER
92Lattice modeling of concrete fracture including the effect of material spatial randomness (Extended Abstract)
J. Eliáš, M. Vořechovský
FRA
94Verification of rapid method for determining the S-N curve in limited life region (Extended Abstract)
P. Strzelecki, J. Sempruch
FRA
95Expansion limit estimation of pistol hollow point bullet penetrating the block of substitute material (Extended Abstract)
J. Hub, J. Komenda, M. Novák
BIO
96Lifetime prediction of wind loaded mast and towers with respect to lateral and longitudinal wind spectrum (Extended Abstract)
S. Pospíšil, J. Lahodný, V. Janata, S. Urushadze, R. Král, S. Hračov
DYN
97Two-scale modelling of strongly heterogeneous continua using the homogenization approach (Extended Abstract)
E. Rohan, R. Cimrman, V. Lukeš
KEY
98Numerical analysis of fractured femur with internal osteosynthesis (Extended Abstract)
V. Kunášek, J. Jírová
BIO
99Limit states of concrete structures subjected to environmental actions (Extended Abstract)
B. Teplý, D. Novák
REL
100Reliability assessment of industrial heritage buildings (Extended Abstract)
M. Sýkora, M. Holický
HIS
101Analysis of measured and computed force effects in tractor’s three-point linkage during tillage (Extended Abstract)
P. Porteš, F. Bauer, J. Čupera
DYN
106Influence of the synthetic jet on the flow around the hump (Extended Abstract)
V. Skála, M. Matějka
FLU
108Modelling of ductile fracture for sub-sized three-point-bend geometry (Extended Abstract)
L. Stratil, H. Hadraba, V. Kozák, I. Dlouhý
FRA
109Unsteady measurements of aerodynamic characteristics of the airfoil (Extended Abstract)
D. Rozehnal
FLU
110On-line correction of robots path based on computer vision (Extended Abstract)
S. Selingerova, T. Kubela, A. Pochyly, V. Singule
MCT
121Non-linear finite element analysis of circular reinforced concrete columns retrofitted by steel jackets (Extended Abstract)
A. Guran, M. Zakariaey
SOL
122Mass lumping methods for the semi-loof shell element (Extended Abstract)
V. Sháněl, R. Kolman, J. Plešek
CME
125Modeling of macroscopic elastic properties of aluminium foam (Extended Abstract)
V. Králík, J. Němeček
SOL
126Macro-mechanical properties of nanotextiles on PLGA base - tensile strength (Extended Abstract)
V. Křelinová, P. Tesárek, I. Klicmanová, P. Ryparová, J. Mukařovský
SOL
128Sensitivity analysis of small punch test (Extended Abstract)
J. Hůlka, P. Kubík, J. Petruška
SOL
129Experimental investigation of air pressure and acoustic characteristics of human voice. Part 1: measurement in vivo (Extended Abstract)
J. Horáček, V. Radolf, V. Bula, J. Veselý, A. M. Laukkanen
BIO
130A numerical study of the bicycle helmet drop test (Extended Abstract)
O. Krupička, M. Šudrich, J. Vyčichl
BIO
131Flow visualization in control valve with profiling cone (Extended Abstract)
L. Bednář, L. Tajč, M. Miczan, L. A. Feldberg
FLU
138Numerical simulation of two-phase flowin a low pressure steam turbine stage (Extended Abstract)
J. Halama, J. Fořt
FLU
140Complex model of the lower urinary tract (Extended Abstract)
M. Brandner, J. Egermaier, H. Kopincová, J. Rosenberg
BIO
141Short-span railway composite bridges: test and rating (Extended Abstract)
J. Benčat
DYN
143Identification of parameters for models of ductile damage (Extended Abstract)
J. Růžička, M. Španiel, M. Moravec, A. Prantl, J. Džugan, J. Kuželka
SOL
145Instability of the swirling flows with/without cavitation (Extended Abstract)
P. Rudolf, F. Pochylý, L. Čermák, D. Štefan
FLU
146Hydraulic design of inducer (Extended Abstract)
J. Stejskal
FLU
147Comparison of two possible approaches to inverse Laplace transform applied to wave problems (Extended Abstract)
V. Adámek, F. Valeš, J. Červ
CME
148Introduction of the analytical turbulent velocity profile between two parallel plates (Extended Abstract)
J. Štigler
FLU
161FEM simulation of an integrated longitudinal and tangential wave probe (Extended Abstract)
P. Hora, O. Červená
CME
162Finite element contact-impact algorithm in explicit transient analysis (Extended Abstract)
D. Gabriel, J. Kopačka, J. Plešek, M. Ulbin
CME
163Modelling of the ceiling slab from the hollow core panels in ansys program (Extended Abstract)
J. Kršík, J. Křiváková
SOL
164Time-discrete integration of finite deformation (Extended Abstract)
Z. Fiala
SOL
168Vibrations of the slender rod induced by the turbulence in the coolant flow (Extended Abstract)
L. Pečínka, M. Švrček
DYN
169Creep size evolution of cement paste prepared from portland cement with content of fly ash (Extended Abstract)
P. Padevět, P. Bittnar
SOL
172Effect of linseed oil on the mechanical properties of lime mortars (Extended Abstract)
C. P. Nunes, Z. Slížková, D. Křivánková, D. Frankeová
HIS
175Optimal semi-active preview control of a quarter car model with magnetorheological damper with respect to tire lift off (Extended Abstract)
F. Havelka, M. Musil
MCT
177Early defect detection of acetabular implants (Extended Abstract)
D. Kytýř, O. Jiroušek, P. Zlámal, T. Doktor, I. Jandejsek
BIO
178Frictionless contact of elastic bodies: comparison of treatment in finite element analysis and isogeometric analysis (Extended Abstract)
J. Kopačka, R. Kolman, D. Gabriel, J. Plešek
CME
179Computational homogenization of acoustic problem in perforated plates (Extended Abstract)
V. Lukeš, E. Rohan
SOL
181Measuring of wheel–rail adhesion characteristics at a test stand (Extended Abstract)
P. Voltr, M. Lata, O. Černý
SOL
182Numerical modelling of the reinforcement corrosion (Extended Abstract)
P. Koteš, M. Brodňan
FRA
184Computer simulation of musical singer’s voice based on MRI and acoustic measurements (Extended Abstract)
V. Radolf, A. Nissinen, A. M. Laukkanen, R. Havlík, J. Horáček
BIO
185Comparison of implicit-gradient damage-plastic models (Extended Abstract)
M. Horák, M. Jirásek
SOL
186Numerical prediction of parasitic energy dissipation in wedge splitting tests on concrete specimens (Extended Abstract)
V. Veselý, T. Holušová, S. Seitl
FRA
188Modeling of fresh concrete flow using XFEM (Extended Abstract)
F. Kolařík, B. Patzák
FLU
191Reinforced elements of structures from the glued laminated timber with high performance lamella (Extended Abstract)
L. Melzerová
SOL
193Dynamic behaviour of locomotive with axle-mounted traction motors (Extended Abstract)
T. Michálek, J. Zelenka
DYN
194Indirect determination of material model parameters for single trabecula based on nanoindentation and three-point bending test (Extended Abstract)
P. Zlámal, O. Jiroušek, D. Kytýř, T. Doktor
BIO
195Numerical simulation of transitional flows with laminar kinetic energy (Extended Abstract)
J. Fürst
FLU
196Material non-linear beam element with shear capacity (Extended Abstract)
J. Kabeláč
SOL
197Application of sensitivity analysis in design of characteristics of damping joints in locomotive running gear (Extended Abstract)
J. Zelenka, M. Kohout
DYN
198BEM shape optimization of a hole in composite for minimum lagrangian (Extended Abstract)
P. Prochazka
SOL
200Assessment of model uncertainties in the analysis of reinforced concrete structures (Extended Abstract)
M. Sýkora, V. Červenka, M. Holický
REL
201The criterion of choosing the proper seeding particles (Extended Abstract)
J. Novotný, L. Manoch
FLU
203Wire glass in building construction (Extended Abstract)
M. Vokáč, M. Špaček, M. Sýkora, P. Bouška
REL
205Measurement of strains in concrete by interferometric fibre optic sensors (Extended Abstract)
D. Jiroutová, M. Vokáč, P. Bouška
SOL
206Large-scale micro-finite element simulation of compressive behavior of trabecular bone microstructure (Extended Abstract)
O. Jiroušek, P. Zlámal
BIO
208Hierarchical multiscale modelling of porous media with applications in biomechanics (Extended Abstract)
R. Cimrman, E. Rohan
BIO
211Fracture properties of cementitious composites reinforced with carbon nanofibers/nanotubes (Extended Abstract)
P. Hlaváček, V. Šmilauer
FRA
213Assessment of fatigue of railway bridge (Extended Abstract)
P. Stachová, P. Štemberk
SOL
214Numerical analysis of coupled heat and moisture transfer based on Künzel model (Extended Abstract)
J. Kruis, J. Maděra
SOL
215Experiment E6/0,2 with lateral passive pressure rotation about the toe (Extended Abstract)
P. Koudelka, J. Valach, J. Bryscejn
SOL
216On effective implementation of the non-penetration condition for non-matching grids preserving scalability of FETI based algorithms (Extended Abstract)
T. Brzobohatý, O. Vlach, Z. Dostál
SOL
218Comparative study on numerical and analytical assessment of elastic properties of metal foams (Extended Abstract)
P. Koudelka, O. Jiroušek, T. Doktor, P. Zlámal, T. Fíla
BIO
219Shape optimization by particle swarm algorithm utilizing isogeometric analysis (Extended Abstract)
A. Pospíšilová, M. Lepš, D. Rypl, B. Patzák
SOL
220Design and use of novel compression device for microtomography under applied load (Extended Abstract)
T. Fíla, P. Zlámal, P. Koudelka, O. Jiroušek, T. Doktor, D. Kytýř
BIO
221Force-torque control methods for industrial robots (Extended Abstract)
L. Flekal, T. Kubela, A. Pochylý, V. Singule
MCT
222Prestressed concrete sleeper under extreme loading conditions (Extended Abstract)
J. Sýkorová, J. Bártová, P. Štemberk
SOL
223Experimental measurement of full-field strains in the vicinity of U-notch in ductile material (Extended Abstract)
I. Jandejsek, O. Jiroušek, D. Vavřík
FRA
224The study of mechanics of deformation behaviour of service robots gripping systems (Extended Abstract)
M. Horák, F. Novotný
SOL
225Evaluation of wedge-splitting test results from quasi-brittle prismatic specimens using the double-K fracture model (Extended Abstract)
I. Havlíková, T. Pail, V. Veselý, D. Vořechovská, Z. Keršner
FRA
226Influence of geometric parameters on the stiffness of traditional dovetail timber joint (Extended Abstract)
J. Kunecký, R. Cacciotti, M. Kloiber
HIS
227Method for constrained designs of experiments in two dimensions (Extended Abstract)
E. Myšáková, M. Lepš
SOL
229Predicting self-compacting concrete shrinkage based on a modified fuzzy logic model (Extended Abstract)
W. R. L. da Silva, P. Štemberk
SOL
230Branch and bound method for global optima of size optimization benchmarks (Extended Abstract)
A. Pospíšilová, M. Lepš
SOL
231The methodology of fatigue test simplification (Extended Abstract)
J. Vágner, B. Culek~jr., B. Culek
REL
232Resistance of concrete with fly ash content under the RWS curve fire loading (Extended Abstract)
M. Šejnoha, M. Brouček, E. Novotná, J. Sýkora
SOL
233Structures with ugli imperfections (Extended Abstract)
I. Baláž, Y. Koleková
SOL
234Material parameters of cement and alkali activated fly ash concrete mixtures laboratory measurements and numerical simulation (Extended Abstract)
M. Šejnoha, M. Brouček, E. Novotná, D. Lehký, P. Frantík, Z. Keršner
FRA
235LTB resistance of beams influenced by plastic reserve or local buckling (Extended Abstract)
Y. Koleková, I. Baláž
SOL
236Numerical simulation of 3D glass sagging process (Extended Abstract)
I. Matoušek, M. Starý
SOL
238Flow based vibrations of sluice gates – physical and numerical modelling (Extended Abstract)
M. Brouček, V. Jirsak, M. Králík, P. Nowak, L. Satrapa, M. Zukal
FLU
241Comparison of composite material degradation assesment methods using acoustic analysis and laser vibrometry (Extended Abstract)
T. Fíla, S. Urushadze, D. Kytýř, J. Valach, M. Šperl
HIS
243Optimization of concentrating structures for river regulation with the use of CFD (Extended Abstract)
P. Fošumpaur
FLU
245Artificial ant colony method for state-space exploration (Extended Abstract)
S. Věchet, J. Krejsa, J. Hrbáček
MCT
246Sequential designs of experiments for sampling-based sensitivity analysis (Extended Abstract)
A. Kučerová, E. Janouchová
SOL
249Computationally efficient algorithms for evaluation of statistical descriptors (Extended Abstract)
J. Havelka, A. Kučerová, J. Sýkora
SOL
250Digital image processing of structure response (Extended Abstract)
M. Petřík, P. Štemberk
DYN
251New designs of external fixators for treatment in traumatology (Extended Abstract)
K. Frydrýšek, O. Učeň, T. Kubín, L. Pleva, L. Žilka, V. Sládeček
BIO
252Simulation of pitting formation in gearing (Extended Abstract)
J. Jurenka, M. Španiel
FRA
254The development of the size of fracture energy of cement paste with fly ash in the time (Extended Abstract)
P. Padevět, O. Zobal
FRA
259Mechanical properties of cement paste with various content of fly ash after 6 months (Extended Abstract)
O. Zobal, P. Padevět
SOL
261Micromechanics-based models of cocciopesto mortars (Extended Abstract)
V. Nežerka, M. Somr, J. Zeman
SOL
268Partial safety factors for evaluation of existing bridges according to Eurocodes (Extended Abstract)
P. Koteš, J. Vičan
REL
270Characteristic of damage to the structural element by creating its “degradation profile” (Extended Abstract)
J. Frankl
SOL
271Discrete topology optimization of planar Cable-Truss structures based on genetic algorithms (Extended Abstract)
V. C. Finotto, M. Valášek
SOL
273Analysis of vulnerability of cultural heritage against floods (Extended Abstract)
K. Nedvědová, V. Kostkanová, J. Frankl, R. Pergl
HIS
275The determination of the kinematic quantities by using the high-speed DIC method (Extended Abstract)
R. Huňady, M. Hagara, M. Schrotter
SOL
276Changes in physical properties of wood damaged by activities of wood-damaging fungi (Extended Abstract)
J. Frankl
HIS
277The inverse kinematics of n-serial robotic chain in different quadrants of working space (Extended Abstract)
Z. Bobovský, F. Trebuňa
KIN
278Trapped vortex ring (Extended Abstract)
V. Tesař
FLU
279The self-excited vibration of the NACA0015 profile (Extended Abstract)
V. Vlček, I. Zolotarev, J. Kozánek
FLU
281Laboratory optical measurement of model blade vibration under rotation (Extended Abstract)
L. Pešek, F. Vaněk, V. Bula, J. Cibulka, B. Tryzna
DYN
282X-ray observation of the loaded silicate composite (Extended Abstract)
D. Vavřík, T. Fíla, I. Jandejsek, V. Veselý
FRA
285Symbolic analysis of a mechatronic drive using the program SAMD (Extended Abstract)
J. Kalous, D. Biolek, Z. Kolka
MCT
288Fatigue under fretting conditions (Extended Abstract)
M. Španiel, M. Nesládek, J. Jurenka, J. Kuželka, J. Růžička
REL
291Long-term monitoring of mechanical damage on the historical structures (Extended Abstract)
P. Zíma
HIS
292Estimation of the critical time step for explicit integration (Extended Abstract)
J. Plešek, R. Kolman, D. Gabriel
CME
293Analysis of deflection of reinforced concrete elements after demoulding (Extended Abstract)
M. Frantová, P. Štemberk
SOL
297Eigenvibration of road bridges: measurement and numerical analysis (Extended Abstract)
J. Kruis, M. Polák, T. Koudelka, T. Plachý
DYN
298The probabilistic calculating of fatigue crack propagation using FCProbCalc program (Extended Abstract)
M. Krejsa
FRA
299Determination of mechanical properties from microcompression test (Extended Abstract)
M. Truhlář, T. Kruml, I. Kuběna, K. Petráčková, L. Náhlík
FRA
300Fatigue crack growth and delamination in fiber metal laminate (glare) during loading with positive mean stress (Extended Abstract)
A. Chlupová, V. Kozák
FRA
302Low cycle fatigue and analysis of the cyclic stress-strain response in superalloy Inconel 738LC (Extended Abstract)
J. Tobiáš, A. Chlupová, M. Petrenec, J. Polák
FRA
303DES simulation of separation control for flow over hump (Extended Abstract)
T. Hyhlík, M. Matějka, V. Skála
FLU
304Study of computational efficiency of numerical quadrature schemes in the isogeometric analysis (Extended Abstract)
D. Rypl, B. Patzák
SOL
306Collision of a rotating spherical particle with flat wall in liquid (Extended Abstract)
N. Lukerchenko, Yu. Kvurt, Z. Chára, P. Vlasák
FLU
309Mondis: knowledge-based system of failure of historical constructions (Extended Abstract)
J. Valach, R. Cacciotti, M. Čerňanský, P. Kuneš
HIS
310Energy sensitive X-ray imaging with pixel stack detector (Extended Abstract)
J. Žemlicka, J. Jakubek, P. Soukup
HIS
311Application of dynamic relaxation method in analysis of cable membrane structures (Extended Abstract)
K. Šobra, M. Hüttner, J. Máca
DYN
312Aplication of high-resolution X-ray radiography for monitoring the penetration depth of consolidants in natural building stones (Extended Abstract)
F. Krejci, J. Jakubek, M. Slavikova, P. Kotlik
HIS
313Comparative acoustic analysis of plane double-wall and multilayered sandwich baffles (Extended Abstract)
S. Karczmarzyk
DYN
316Stress wave propagation in the Institute of Thermomechanics (Extended Abstract)
M. Okrouhlík
CME
317Numerical analysis of a bridge pier subjected to truck impact (Extended Abstract)
P. Jiříček, M. Foglar
DYN
318Blast performance of FRC composites (Extended Abstract)
M. Foglar, M. Kovář
DYN
319FEM simulation of high velocity shock waves in fiber reinforced composites (Extended Abstract)
M. Žmindák, Z. Pelagič
DYN
320Natural ashlars of historical monument – modern methods of data processing and storage (Extended Abstract)
M. Bednarik, K. Kovářová, R. Holzer, M. Laho
HIS
321Modelling of fatigue failure of gears with thin rim (Extended Abstract)
M. Ševčík, L. Náhlík, P. Hutař, M. Zouhar, B. Máša
FRA
322Simulation of flight control of a hummingbird like robot near hover (Extended Abstract)
M. Karásek, A. Preumont
MCT
323Input shaping control of electronic cams (Extended Abstract)
P. Beneš, M. Valášek, O. Marek
KIN
326Simulation of the behaviour of a 3D link of a knitted fabric made of Ni-Ti to the mechanical loading (Extended Abstract)
J. Kafka
SOL
331Problems of producing test samples from callus dental (Extended Abstract)
T. Topoliński, M. Wirwicki
BIO
340Relationship between fatigue life and structure of human trabecular bone (Extended Abstract)
T. Topoliński, A. Mazurkiewicz
BIO
344Mixed-mode higher-order terms coefficients estimated using the over-deterministic method (Extended Abstract)
L. Šestáková
FRA
345Implementation of direct numerical simulation of viscous incompressible flow (Extended Abstract)
M. Beňo, B. Patzák
FLU
346Variants of Navier-Stokes equations (Extended Abstract)
F. Pochylý, S. Fialová, H. Krausová
FLU
347The boundary between linearity and nonlinearity of the dynamics of gear drives (Extended Abstract)
O. Ahmedov, V. Zeman, M. Byrtus
DYN
348An enhanced numerical solution of Blasius equation by means of the method of differential quadrature (Extended Abstract)
A. Guran, J. Gwinner
SOL